I'm trying to configure NetFlow on Cisco IOS-XE SD-WAN. It seems I can configure NetFlow from vSmart with the following settings: cflowd-template NETFLOW template-refresh 60 flow-sampling-interval 1000 collector vpn 3301 address 10.10.10.254 port ...
Forum Posts
Hi,I appreciate any advice on how to select an appropriate ISR 4000 model and DNA software subscription licence.Currently our site is using two ISR4331s with Tier 0 DNA software, connected to two Internet lines - one is 100Mbps and the other one is 6...
why SDWAN is successful in market rather than traditional routing & switching network or legacy one ?Please explain in simple words
We detected traffic from an external malicious server targeting one of our sites through the firewall.We would like to check whether there was any access to the Cisco SD-WAN Router from this source.Is it possible to confirm traffic access logs (such ...
in general, why asymmetric routing is not useful ?do it create slowness ?anyhow data is reaching to destination from source .Please share pros and cons of Asymmetric routing
Although we have configured all traffic to route through Private1(SD-WAN Router 1) using AAR, there is still some traffic passing through biz-int. We have built the SD-WAN environment with the configuration shown in the attached image. On the vSmart,...
Jio airbiber internet is not working in my clients Cisco ISR 1100 4G. Is there any setting to be changed
We are running 20.12.3.1 / 20.12R-vbamboo-28-Jun-2024I have tried to read CG522 radio information using /device/cellularEiolte/radio, but it does not return all the parameters in the list, i.e. most of the ENDC values are missing, like ENDC-active-ba...
Hi All, This simple thing is still haunting me and no one seems to know the answer. What is the difference between Local and Running Configuration. Working with Cisco device for more than 2 decades, I know what a running-configuration is. This is th...
Hello Everyone,I need assistance with the Vmanager API, I need to reattach a device that in CLI mode to an existing template. I have used multiple API calls such as https://vmanage-ip-address/dataservice/template/device/config/attachfeature and /atta...
Hi , one of our customer have multiple 8k routers running sdwan. now they are looking to utilise "SDWAN-UMBADV Cisco Umbrella for DNA Advantage" provided complimentary by cisco. please suggest how we can use these, what are the features available an...
I have an SD-WAN test lab environment in EVE-NG where I'm hosting the vManage, vSmart, & vBond, along with various vEdge & cEdge routers.I'm running into some strange issues where the vEdges do form tunnels to each other, I am able to ping site-to-si...
I am trying to clean up our SD-WAN templates and it seems a lot of our clean up and be accomplished if we had the ability to specify auto negotiate or hardcode 100/1000 Full Duplex onto a VPN feature template. But you can't have a template that does ...
Hi. I have a C8500-12X. But I cannot see the HSEC License. I know that It is default in all C8500 Platform. What should I check ? Should I try to factory reset ? Thank you.
Hello, has anyone encountered this problem? I installed Root CA on vManage 20.9.5.2 and tested it by creating it from vManage, openssl and xca and got the same error. openssl req -x509 -new -nodes -key ROOTCA.key -sha256 -days 730 \> -subj "/C=US/S...
