Storage Networking

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Save 25% on Day-2 Operations Add-On License

 

Forum Posts

HI all,I have MDS9250i switches with base license (20 ports). I have used 20 FC ports and now need to use the built-in 8 FCoE ports. Would I be able to activate and use the 8 x 10G ports for FCoE without purchasing more license?thanks,Robin

robin99 by Level 1
  • 1106 Views
  • 3 replies
  • 0 Helpful votes

Hi all,I have a few Brocade switches and I am looking for a tool that does packet capture for fiber channel traffic, similar to Wireshark for IP traffic. Has anyone used one or recommend one ? or Can Wireshark capture and decode fiber channel traffic...

dtran by Level 6
  • 6093 Views
  • 2 replies
  • 0 Helpful votes

Hello,I'm using a HP Tape Storage ( Ultrium 3280). This tape storage has a SAS cable and I want to connect it on my UCS 220 M3..Question : What it the Mini-SAS (SFF-8088) card that is compatible with a UCS 220 M3. i.e have an external SAS port.Regard...

iantra123 by Level 3
  • 1892 Views
  • 1 replies
  • 0 Helpful votes

I have entered the world of storage networking this past week and need to get MDS9100's up and running for a Lab EMC VNX. I am very versatile in LAN/WAN and also Nexus, just not storage tasks within the Nexus platform. The MDS seems to be NX-OSish an...

Has anybody successfully extracted performance data from DCNM-SAN ?Until they pulled the CIM off the fabric switches IBM's TPC was brilliant, however now I cannot get TPC to connect to DCNM-SAN to pull performance data.I tried using PM.BAT to script ...

Hello Folks,I acidentally erase the kickstart image from MDS 9124 San Switch, and now the switch can't are in the "loader>" mode. There have many options to configure the Mgmt interface whit a ip/netmask, and a command to make the boot via tftp serve...

netadm by Level 1
  • 1904 Views
  • 2 replies
  • 0 Helpful votes