Good Day, I have installed Cisco 3560 Core Switch and 4 2960x department Switches running VLAN When i ping default VLAN to VLAN then ms is shoiwng ok as below but to VLAN 10,20,30 is showing high ms. Default VLAN result Pinging 192.168.0.10 with ...
Forum Posts
Hello.....I am working through an issue on a switch stack and I am trying to find out the best way to go about this. I have a switch 3850 with an 1000BaseLH SFP in it. We have been having a few issues with this port and have had to use different SFP'...
I would like to send my x.pkt for you, to help me for reviewing. However, I am a beginner and don't know how to send the file for you HERE.
Hi, I have a scenario where we have 2 Cisco 5516 Firewalls that are configured as Active/Standby mode. Here is a simple topology below: Now my issue is, I would like to have my Inside link to be redundant. Meaning if for example, If I unplug the...
Can you help me if i can stack ( WS-C3850-48P-S ) with ( WS-C3850-12X48U-S )
Hi All,I just want to take insights regarding the unusual order of the supervisors on our core switch. The core 2 sup 1 became the active sup while the core 1 sup 1 become the hot standby sup which is not the correct order. This is the correct set...
I have implemented a logging discriminator (workaround for CSCvi84511) as follows: logging discriminator AP_Dup severity drops 3 facility drops CDP mnemonics drops DUPLEX_MISMATCHlogging host 10.2.3.4 discriminator AP_Duplogging buffered discrimina...
Team, I'm facing the problem explained below to one of our customer switch 6807 VSS Pair. s2t54-adventerprisek9-mz.SPA.151-2.SY5.bin VLAN 2 SVI 192.168.1.0/24 PBR to route some of the IPs to the next hop of different ISP. Everything was working fine ...
In the above design there are three network 192.168.1.0/24,192.168.2.0/24 and 192.168.3.0/24. I want PC0 be able to ping PC1 and PC2. I have set default getway for PC0 as 192.168.1.1. Now I can only ping PC1 and not PC2. If I change the default getw...
Here is an interesting scenario for consideration: I have an enterprise, "A", which intends to form a VPN to share data with remote partner, "B". Both A and B are using network space that overlaps, and for reasons beyond my control, the partner is...
Hi All I have a quick question about Stackwise virtual When setting up a switch, I have seen the configs below, my question is, on the second switch, do you still put in hte command stackwise-virtual link 1 ? so basically they match on both switches ...
I am facing an odd layer 2 behavior between 4 Cisco Router ASR1002-HX connected at the same Cisco Catalyst 2960 within the same vlan. Randomly each router can't reach the others within the same local vlan. No layer 1 issues are present. We face the s...
Hi! Were are migrating a BRAS from Cisco 3745 to ASR1002. We have all set, except for one problem, the ASR it's not generating trap messages on virtual-access link status events. snmp link-status event works fine with static interfaces. I did an up...
We have a stack of Cisco 3750X-12S-S which developed a strange problem where we would lose management after a while - no SSH, Telnet, HTTP access. Putty immediately returns "server unexpectedly closed network connection". We rebooted the stack, upg...
I upgraded to 16.3.6 and it was resolved. apparently a known issue in 16.3.3
