Switching

I need to provide the output for one 3750x switch out of a cluster of 7.With all of the various stats, the entire log will be fairly large.

Hi,I have two offices connected by a fiber. Each office are connected with a cisco 3750 and in the middle I have a cisco 2960G.I have several vlans and using trunk ports to pass through all vlans in the same fiber Cable.I want to monitor and see how ...

Hello, I want to establish an OSPF relationship between CMTS and a Cisco router connected to it through modem.I have full connectivity with bundle interface, but I can't hear OSPF Hellos. I supose this is due to ip secondary address. I can't move thi...

Hi,Currently my network has a Cisco 3825 performing all the vlan routing work. I have a Cisco 3560X behind it that could be configured as a full layer 3 switch, thus removing the need for the Cisco 3825 altogether or at least optimizing the functions...

Hi I have a number of training environments and each has a pair of VSS swtiches.  The training environments are removed at the end of each session and rebuilt.  I have had a problem where incorrect VSS ID's have been entered upon rebuild and have cau...

Hi Experts,I am facing issue in NATing.We are planning to move Old server (physical) to new Server (Virtual). We have two different subnet for Physical (172.24.1.0/24)  and virtual (172.24.7.0/24).However issue is this server application has a client...

Hi guys,we have to migrate a VSL from a 2 Gig-Channel (2x1Gig on a linecard) toa 20 Gig-Channel (2x10Ten on the sup) to correct some design failures.Platform ist a Cat 4506-E with Sup 7-E 10GE (SFP+).Is it possible to do it in a kind of "in-service s...

Hi I am facing packet loss on a port and wondering if anyone has any suggestions. I have a 2960x stack of 2 connected to a 6880 vss pair using a port-channel with 2 x 1g links 6880    -----------------------------  2960x            ------------------...

Hello, if i have a port-channel with 4 ports in it with LACP. And i want to make two ports as a backup with max bundle command. Do that 'backuped' ports will be just "unselected" from etherchannel, o ir will be physical down ? Thanks I don't have the...

I have a system where the Main location has multiple branches . All the branches have their own MetroEthernet circuit on a 3650 that comes back to a single interface at the Main location's 4500. This is why it is configured as a point-to multipoint. ...

Customer has a Nexus 7000 and they're using PBR to force certain kinds of traffic (voice/video) out a different gateway. Will the N7k force multicast traffic out the same path? Right now their multicast traffic seems to be taking the default route ou...

Hello All.  I have a WS-C3750X-48P and a WS-C3750X-48 stacked.  The WS-C3750X-48P provides POE but the WS-C3750X-48 does not.  Is there any way to make the WS-C3750X-48 provide POE without purchasing an entirely new switch?

Hello, Yesterday we had a desktop tech patch a linksys switch into 2 different access ports on 2 different 3560s on our campus. This in turn created a major problem in which the entire network was acting sporadic. The core 4510 CPU spiked to 99% and ...