Switching

Discuss Catalyst brand switches with peers and experts.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Labels

Forum Posts

Hello, Cisco Community!I’m really happy to share that I’ll be hosting the Cisco Community Lab Series, a brand-new hands-on learning journey designed to help you build practical networking skills step by step.Every Thursday at 8 PM EST, I’ll post a ne...

I need to stack two Cisco 3850 switches...they are on different IOS....one is 03.02.02.SE and the other is 03.02.03.SE.....as you know for stack to work they need to be the same....so my question is has upgrading the IOS on these switches changed fro...

Good morning folks, I need to connect my Cisco 3750x with a 10Gb DAC cable to our HP Bladecenter server chassis. What module do I need to purchase for the 3750 in order to do this? Please advise.Thanks in advance.

Ricky S by Level 3
  • 1373 Views
  • 1 replies
  • 0 Helpful votes

Hi everybodyI have a question.   Please consider the following config:SW1(config) int f0/1SW1(config-if) mls qos trust dscpSW1(config-if) msl qos dscp-mutation DEMODEMO Mutation map;dscp 24---> 26  I.e incoming dscp value 24 will be mapped to 26+++++...

sarahr202 by Level 5
  • 1084 Views
  • 1 replies
  • 0 Helpful votes

Hi all,Here is my topolog and have different VLAN's and the layer3 switch is the VTP server. The conection are group by PAgP protocol.Now i want to setup intervlan routing with the hlep of layer3 switch, but i don't see such option on "interface port...

Hello I´m trying to setup 802.1x on an old 3560 switch.The Switch is a:Switch   Ports  Model              SW Version              SW Image------   -----  -----              ----------              ----------*    1   52     WS-C3560-48TS      12.2(25)...

Hi Folks,We recently had a core switch reboot itself (in face it was constantly rebooting into Rommon and then restarted without me doing anything). I have absolutely no idea what caused the problem. I power cycled the switch and it reloaded fine, co...

i have about a dozen2960 that i wish to implement port security. Some users tend to bring their own router and cause mayhem to the network. I've tried DHCP snooping, dont seem to work and port security testing on a few ports work well.What are the re...

hi ,i need to setup network teaming and do ethernahcneel betweenCatalyst 4006 & Linux serveri want to ask , does catalyst 4006 support lacp ???if dont support lacp , does pagp cant be work if the 2nd side is not a cisco device ?? in my case "linux se...

Dr.X by Level 2
  • 911 Views
  • 3 replies
  • 0 Helpful votes

Hi,I am testing Vloud cloud director an CSR 100V I installed CSR 1000V with,Vlcoud director.All is Ok but ...Anothing is indicated in documentation of CRS 1000V for installed with Vloud director.The documentation say for Esxi.You can see pdf file for...

a.auvinet by Level 1
  • 1078 Views
  • 0 replies
  • 0 Helpful votes