Switching

                   We are going to be rolling the 4500 switches out and I wanted to know more about how to use the wireshark featue. Does anyone know if thee is documentation on how to use this?

I currently work in the IT field part-time as a end-user support technician while I am finishing my Bachelor's Degree in Network Administration.  I'm not completely new to networking at this point, but I am by no means a master of it either.  The bas...

Greetings,Does anyone know if it is possible to configure LACP etherchannel to a Catalyst 3750?  Playing around with the SMB switches for the first time.  I know how to do it on the 3750 but am having trouble figuring out the sge2000p.  Any advice or...

Could anyone offer suggestions on the best method to monitor the data being sent over a link? I have 2 Blade servers, 1 primary and a backup in the same location. I would like to move the backup to a different physical location and need to determine ...

Guys, I have setup an outbound QoS as bellow,  but im not sure how the (exceed-action) will operate. ihv policed web-traffic to 200kbps, but i want my web-traffic to be able to use 100% of the link while there is no VPN-TRAFFIC (priority-traffic), bu...

Hey Guys,I'm in the process of configuring QOS on a 3560 routing switch in a GOLD, SILVER, BRONZE priority type scenario.Firstly,  I understand that this config will add a tag of "precedence 5" to a packet if it matches the "ACL_QOS_GOLD_In" access l...

                   Hello, I support an active VSS cluster using 2 x 6509E chassis with single Supervisor 3C modules in each chassis. I want to replace these with Supervisor 2T modules. All my service modules and line cards are supported with the Sup2...

Hi all!I have configured a LACP port-channel on my Cisco 4506 on one side and a Win 2k8R2 Fujitsu Server (Intel NIC) on the other. I have three interfaces on the server that join the etherchannel without any problems. Looking at the sh int po 9, I ge...

Hi everybodyI need some advice.I have about 400+ devices on my network (let's say 1000 to provide for growth). They connect to different switches at different locations in the building which all connect to our current core switch (3com 4924).I want t...

Hi All,need urgent help...Our customer is having C6513 running with 12.2(18)SXF15a . One of the module (ACE20-MOD-K9) got rebooted with following error:==================================================================================================...

Hi,I have 2 ASR routers running PIM-SM between them on several sub interfaces.PIM hello interval configured for 200ms.Sometimes PIM neighbors between ASR routers going down.Reboot for each router not resolving the problem.Deleting  ip pim sparse-mode...

Hello at all! I´ve a little problem with the aaa authentication over RADIUS with a Cisco 3560G-48PS - IOS 12.2(58)SE2.When I try to log in to the Switch per Telnet, it didn`t works and my windows domain account is locked. Here the aaa config:aaa new-...