Switching

Discuss Catalyst brand switches with peers and experts.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Labels

Forum Posts

I'm trying to 'convert' IOS QoS from a Catalyst 4506 to NX-OS QoS on a Nexus 7010. I'm working my way through the white papers right now but I would greatly appreciate if someone can offer some guidance as to how to get this going on the Nexus.From t...

Hi,Due to ip address confliction issues I am trying to change the destination address of traffic hitting my router when sourced from a 3rd party router.So, if traffic sourced from 10.0.0.0/24 from 3rd party router targets a loopback on my router, let...

I have a DHCP server running out of a 2621mx and everything works as a charm when an win xp clients ask for an ip add; however, where i run into a wallis when a win 7 clients wants an ip dynamicly... the only work arounf to this issues I have use to ...

Dear All,I have a problem when i try to access cluster management system it shows me Java error please view the attached image file.Please provide me exact link to download the Plug in actully i didn't understand which plug should i download.        ...

Hi Experts,Need assistance in configuring the ntp....I have a switch which also serves as a dhcp server to the hosts connected to it.The switch serves  IP address too the devices connected to it and i would also want it to provide time to the connect...

Hi,I got tested qos cbwfq using iperf and here is my configuration :class efmatch ip dscp efclass af21match ip dscp af21class af11match ip dscp af11policy-map testclass ef  priority 512   police 512000 conform-action transmit exceed dropclass af11  b...

Hi all, I have a 6506 with “ WS-X6K-SUP2-2GE”. The switch does not boot after restart, it goes to “rommon” mode, I have to manual enter command “Boot” then it boots and everything works like normal. The boot command is on configuration file (attached...

viett by Level 1
  • 1805 Views
  • 6 replies
  • 0 Helpful votes

Hi Experts,Would like to get assistance on the following issue that i'm currently facing.I have the setup as follows:Internet --------------> Router --------------------> SWitch ---------------> HostsRouter is acting as the default gateway and has an...

Hi,Can you please advise on how to clear vty line?  Please see below. A sh tcp <line number> shows that the TCB is waiting for TCP Process.  The TCP processs TCB is waiting for is SSH.  I believe because of this ssh process still running, the vty lin...

pokwan by Level 1
  • 5090 Views
  • 7 replies
  • 0 Helpful votes

Hello everybody,Itis possible to create wireless VLANs on Cisco Packet Tracer 5.3? I have been trying to do this on a 2811 router with IOS 12.4(15)T but i can't create a VLAN in order to associate it with a SSID.Thank you in advance!

                   Hi, I have been thrown to the wolves at work, and am truly frustrated.  I am a service provider, with the task of installing a systech device at a site, and was told all I needed was DHCP enabled and dynamic IP for the internet.  T...

sklwater2 by Level 1
  • 2466 Views
  • 2 replies
  • 0 Helpful votes