Hi,Is anyone aware of any limitation on building an etherchannel on the abovementioned linecard, when bundling more than one port on the same card?The 4506 is using a 6L-E supervisor engine 12.2(54)SG1.If it's done on a 6500 with a WS-X6148-GE-TX lin...
I need to connect 2 vlan on a Cisco router VLAN 877 and the second does not connect to anything. PING only to itself, being one who hangs on a switch where there is another router with an IP in the range of VLAN 2. VLAN 1 works well.interface FastEth...
Here i have a customer who has 7609 router with modulesws-+6748-ge-txws-svc-wism-1-k9ws-sup720-3bws-sup720-3bws-svc-wism-1-k9ws-6724-sfpws-x6704=10gews-x6724-sfpwill this modules will be supported to the new chaisis ios or in the chaisis 7609S
Hi, folks:1.) If you don't mind, let's talk about something basic: native VLANs. Legend has it that there is a need for a native VLAN (aka a VLAN in which untagged traffic is placed) for backward compatibility with switches that don't support dot1q ...
Hello,I have just downloaded the new(est) firmware version 1.0.39. But can anyone plse tell me how to install ?? (step by step??) Currently I' am using 1.0.31 but do frequently loose internetconnection.Thanks for your help!
Good morning,in our datacenter we are using two 3750G stack as L2 core switches; in the last year we're suffering a strange problem: we're seeing unicast traffic spread over all trunk ports (basically all the uplink to the satellite switches). In the...
Hi,We have cisco 4506 and this got reloaded automatically and showing reload in show version output but no one made switch reload.CORE-SW-2 uptime is 8 minutesSystem returned to ROM by reloadSystem restarted at 12:37:58 IST Wed Dec 14 2011 Attach...
Hi All,I have the following scenario and some questions.The environment I have is a 6509E with a NAM (NAM-2-250S) module.Within the network we have 4 x 4506 Catalyst switches.What I would like to achieve is the ability to monitor traffic from the 450...
I was checking the routing table on my 3750 stack and noticed something that appears abnormal to me. My route statements are:ip route 24.52.116.0 255.255.255.0 10.0.6.254ip route 24.52.117.224 255.255.255.248 10.0.6.254ip route 72.240.116.0 255.255....
Hello Experts,We are planning to upgrade our network and comparing different models of switches and router. At this point we have about 300 nodes and 400+ users on the network spanning 4 buildings, but in the near future it is going to be expanded t...
Dear All,I'd like to get some materials explaining each IOS version releases time-line, relations with trains.Especially time-line between a train and a train is needed.(for example: 12.2SX vs 12.2SE)I have read the white paper of IOS, but I need mor...
Dear expert,I have a case like this: for some reasons, i can't connect MyServer direct to Fiber Media Converter, so i connect it via Cisco 3560GMyServer------------gi0/1.CiscoC3560G.gi0/2----------Fiber_media_converter_100----------------------------...
