Buy or Renew
Buy or Renew

Switching

Discuss Catalyst brand switches with peers and experts.
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation

Labels

Forum Posts

Start a conversation

Resolved! WCCP issue on 3560G and bluecoat SG800

i`ve enaled the wccp fetrue in the 3560G,wrok with the bluecoat SG800most time them wroked very well,but i found there is the communication faiure with itunes and msnis the anyboby can explain this?and how to fix this ?here is the config:SW: version ...

Resolved! Multicast routing 3750G switch

Hiam going to configure multicast routing in out 3750G switch, since we are going to install citrix web.do I need to configure as follows if I miss some thing can any please help me. while do this will there be any slight out age on thisDA-3750-1(con...

EIGRP load balancing

I have 4 x 3750E in a stack which provide connectivity to a server farm, I want to linkthe stack to a 6509 but  need to know which would perform better load balancing. A4 x 1G point to point Layer 3 links with a summary route advertising the server f...

g.peart by • Level 1
  • 450 Views
  • 1 replies
  • 0 Helpful votes

Resolved! Cat 4006 Management Port Configuration

I have a 4006 switch in production. The Management port on Sup-II is assigned IP as shown below.set interface sc0 5 10.10.10.1/255.255.255.0set interface sc0 upWhen I directly connect a desktop to this port I can not ping/telnet. However if I connect...

avilt by • Level 3
  • 1238 Views
  • 9 replies
  • 0 Helpful votes

I hear from Cisco that I am suppose to ignor this error >>>Nexus-7010-01 %EEM_ACTION-6-INFORM: Packets dropped due to IDS check length consistent on module 1

I hear from Cisco that I am suppose to ignor this error, but why am I getting it?  I would like more information to explain to the customer why they are seeing this error on a regular basis. >>>Nexus-7010-01 %EEM_ACTION-6-INFORM: Packets dropped due ...

clyded by • Level 1
  • 521 Views
  • 1 replies
  • 0 Helpful votes

Subnet

Hello Everyone,I'm not sure if this is the right place to ask for help but I have been troubleshooting this issue for the last two days.  The issue is that the we are having an issue connecting to a website www.ccsd.net, just this webite, so far...  ...

dacruzer1 by • Level 1
  • 1433 Views
  • 7 replies
  • 0 Helpful votes

6509 dual-Sup720 getting TCAM Inconsistency Message

We have tried pulling the ACTIVE Sup720.  Still gets the error.  So I think it not a Hardware problem.Upgrading the Code to :6509: #show module                         HW      FW      SW Module 5         4.6       8.4(2)   12.2(33)SXI4 Module 6  ...

Resolved! reload FWSM in VSS Mode

Hi All,  I would like to reload my FWSM configured in failover mode, the switch is in VSS mode. Is the command "hw-module module # reset" will reload the two pair FWSM or only the active one? thanks in advance!cheers!reymon

Mhon Baul by • Level 1
  • 1409 Views
  • 3 replies
  • 0 Helpful votes

Value?

Hello FolksPlease examine the  below,its from my port-channel 128413595891 packets input, 41216125682653 bytes, 0 no buffer     Received 4813824 broadcasts, 0 runts, 0 giants, 0 throttles     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored     0...

Load more