Switching

/* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5...

Hi,According to the Cisco Book:Quote:By default, PAgP operates in silent submode with the desirable and auto modes, and allows ports to be added to an EtherChannel even if the other end of the link is silent and never transmits PAgP packets. This all...

I am trying to recover password for cisco 2950 Switch after reboot i am able log in switch but while reset the password i am trying to entered in global configuration mode and type conf t  commend iam getting "% Authorization failed." Message.   Kind...

Dear Experts,I have cisco 3660 Router which is having some issue, It was working in production and suddendly hang and then when i rebooted Fast Ethenet ports are not working.......when i start router it gives below error.....cisco c3660 (R527x) proce...

I have a nexus 5020 NX-OS 4.1(3)N2(1) configured for radius server authentication and I have a group "network" in ACS that has the shell:role="network-admin". I have notice that if your in ACS as a user not of my "network" group the Nexus will still ...

Hi,We would like to connect a 10Gb X2 and a TwinGig X2 to the same Supervisor (WS-X45-SUP6-E) is this possible. The release note are a little vague.thanksAndreas

%FHRP group not consistent with already configured groups on the Switch StackWe are running HSRP V1 on several VLANS on a 3750G swtich.   We want to use HSRP V2 on the new interfaces because it allows for higher group numbers that can match higher vl...

I have a SGE2010 layer 3 switch. I need to set up a static route that forwards all traffic going to 172.31.1.0/24 to 192.168.1.8. If I were using a command line interface on a Cisco device I could do it by typing "ip route 172.31.1.0 255.255.255.0 19...

/* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5...

I have an asa 5500 router.  I am routing public traffic to one or more web servers that are behine the firewall.I have a rule that NAT''s  outside xxx.xxx.xxx.001 on port 80, to private ip 192.168.1.101 on port 80outside xxx.xxx.xxx.001 on port 1080,...

I have a customer who arelady have a following quote from HP:(6) HP-A5500-48G EI Switch(12) 2-Port 10-GBE SFP Modules(24) HP X130 10G SFP+LC SR Transceiver(6) HP RPS 800A Redundant Power SupplyWe are pushing hard for Cisco, and was wondering what wou...

Someone can help me?igmp snooping work fine with next packet flow:(traffic from vlc media )# tcpdump -vvvi rl1 dst 238.238.0.8tcpdump: listening on em1, link-type EN10MB (Ethernet), capture size 96 bytes11:54:05.732013 IP (tos 0x0, ttl 1, id 50863, o...

Greetings,I've got a Nexus 7010 setup for authentication and that works fine against a Windows RADIUS server.The problem is the default role is the network operator role and I really need vdc-admin or otherwise a role that allows full access to the d...