Switching

Discuss Catalyst brand switches with peers and experts.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Labels

Forum Posts

Hello, Cisco Community!I’m really happy to share that I’ll be hosting the Cisco Community Lab Series, a brand-new hands-on learning journey designed to help you build practical networking skills step by step.Every Thursday at 8 PM EST, I’ll post a ne...

Hi all,I have a Catalyst 3560 with a 12.4 ipservices image, in which I configured DHCP server for a data vlan and a voice vlan. the configuration is:ip dhcp pool <pool name> network 10.0.0.0 255.0.0.0 default-router 10.0.0.1 Pool 1 is for data an...

Hi everyone! I'm having trouble with my 871 router.My problem is the next one.It's starts like this:My ISP give me an address by DHCP, it is connected to a 1841 (Fe 0/1), on Fe0/0 I assign 10.22.1.1 and by DHCP on my 871, I gather the IP the router g...

1. Sometimes i can not login the 4507R switch using telnet , but i can login 4507R after reboot the 4507R .2. Using ping to test the network performing, ping the vlan interface of the 4507r directly, like this:Reply from 192.168.0.254: bytes=32 time=...

wudandong by Level 1
  • 626 Views
  • 3 replies
  • 0 Helpful votes

Hello, I have a customer who suffered a crash of his 4507R with dual Sup IV supervisor 2 weeks ago.The primary one has not come to life, it only turns on the POWER led and only the "ODD" UTILIZATION leds, all in green.The secondary, that at time of t...

admin_2 by Level 3
  • 757 Views
  • 2 replies
  • 0 Helpful votes

Hi,We had an outage for one of our enterprise customer few days back. Upon recieving complaint we checked the network by capturing the traffic and found that there was ARP broadcast upto 40% of the total traffic captured and whole network was almost ...

rmujeeb81 by Level 1
  • 7182 Views
  • 10 replies
  • 0 Helpful votes

Hello. First of all thank you for your help on creating TCL scripts. It works very well on all our IOS switches except CatOs :). I have another question... Is EEM supported on Nexus and ASA?

20vek by Level 1
  • 875 Views
  • 5 replies
  • 0 Helpful votes

Hi, everyone:Im receiving a community string from my ISP, but I dont know if this is going to impact anything. Im not honoring it anyway....I asked them about it, and the tech said he couldnt figure out why I was seeing what I am seeing below:R-2#sh ...

lamav by Level 8
  • 508 Views
  • 2 replies
  • 0 Helpful votes

Hello,Has anyone had success with configuring VLAN mapping on a Cat6500? I have tried to enable it on a single port, but when I enable it multiple ports are affected. I receive the following notice when enabling on a port:VLAN mapping is also change...

rwt by Level 1
  • 4789 Views
  • 1 replies
  • 0 Helpful votes