Switching

I have the following scenario: The network core are provided by Catalysts 6500. Unfortunately there's only one VLAN configured.I need to determine the bandwidth utilization each server has per flow over time.My question is if possible to configure th...

what is the difference between sup-bootflash: and sup-bootdisk: ? on a sup-720.

Hi! I wonder is possible that all (selected) logs is automatically saved to external flash or USB device? I mean, same as syslog sent to another server/machine.More thanks, Alar.

Hello everyone. We have a 3750 stack connected to a 6513 with 10 gig SM fibers. We are seeing input, crc and some framing errors. We checked the fiber, and found it to be within the specs for 10 gig (as far as loss goes). When I drop this connectio...

i m getting the following log message which causes entire network down where we connected 50 switches and 700 users pc connected. This the log message i m getting in cisco 4000 L3 switch . In port Gi2/15 i have connected up link of another floor whe...

Hi guys,I am 99% certain that my design will work but just wanted to pose the question to you guys to confirm as I don't have a test lab!I have a remote site that I have a Cisco 3560 - 24 Port switch installed with IP Services. At present it is a L2 ...

Is there Qos on LAN, if there is how to do it? thanks!

Please any1 help me im a beginner for cisco that i need to configure the 12 core switch 3750. how to assign ip address to the switch and assign vlan w/ ip address to each core. add vlan id and name. and if possible, if the same vlan id and vlan name ...

Can I upgrade IOS on a Catalyst to the same version but with encryption so I can enable SSH? Or does this violate any licence agreement?

I am having an issue using tftp to copy the IOS image into my UC 500. I get an "Error Opening" message then I get a (socket error) at the end.The Ip address, File source and destination are all right. Im not sure what else I could be doing wrong.

Hi - We have an HP server with an A/A teaming configuration that serves up DHCP. The two interfaces are connected to a 4506 with port channel assignments, but I see that they left the channel-group mode as "desirable" on both interfaces, instead of ...

Hi alldoes anyone have any sort of testing plan for interoperability between cisco and other vendors equipment, ie with spanning tree, vrrp, etc. As im looking to set up one very shortlythanksCarl

Helloi have switch 2960G-24TC-L when i'm insert 1000BASE-SX module to the port Giga 0/23and i can't see the LED go to green on this port , and when i run command # show inventory doesn't see the fiber module , only see 2960G-24TC-Lwhat's problem may...