Switching

Discuss Catalyst brand switches with peers and experts.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Labels

Forum Posts

Hello, Cisco Community!I’m really happy to share that I’ll be hosting the Cisco Community Lab Series, a brand-new hands-on learning journey designed to help you build practical networking skills step by step.Every Thursday at 8 PM EST, I’ll post a ne...

How do i get the (XX) after the ACL in show access-list command. It shows up on routers but not on a 3750. Is this a limitation or a command to turn it on?#sho access-listExtended IP access list 100 10 permit ip 10.120.1.0 0.0.0.255 10.120.14.0 0....

mikegrous by Level 3
  • 786 Views
  • 5 replies
  • 0 Helpful votes

hi guysi am trying to configure as-et with bgp aggregation but sounds somthing missing in the attached topology R0 AS 1R1 AS 10R2 as 20all Ebgp.. i have advertised route from R1 then aggregate it normally apear in all peersals i did advertised a rout...

Resolved! IOS Upload

Hi,Thanks all in advance,In XYZ site network there are multiple cisco 2950 switches, Unfortunatly I could not able to connect to the TFTP server from this switch, all other are succesfull. Is there any way that I copy the IOS image from other cisco 2...

The company I work is getting ready to implement a new VPN Scheme using RADIUS. It is an older protocol, yet, when setup the user will be challenged by our Windows AD. Has anyone ever set up RADIUS on a PIX?Any good pointers?

admin_2 by Level 3
  • 340 Views
  • 1 replies
  • 0 Helpful votes

Resolved! SNMP TRAPS

Hi alli have a quick question to ask,i've been tasked with making all of our switches and routers have standarization.I know that you have to have SNMP enabled on servers and infrastructure devices.I'm on the core switch and i ran the command hixcswt...

The problem occurs every 24 hours network locks up after rebooting all switches seems to be fine.One switch I see in flash3560 12.2.37 SE1irectory of flash:/ 2 drwx 256 Feb 27 2009 20:25:57 -05:00 crashinfo_ext 4 drwx 256 F...

jfeo by Level 1
  • 1980 Views
  • 16 replies
  • 0 Helpful votes

Hi,In a remote office I have a 3650 and from it's 0/24 port there is a trunk to a Nortel switch. The Nortel switch has no managment (just out of the box). Anyway from time to time the trunk will shutdown and get this error:sh log | inc 0/24 1w6d: %...

whiteford by Level 1
  • 4788 Views
  • 6 replies
  • 0 Helpful votes

Is there any document that shows the meanings of different model numbers? For example WS-2924XL-EN being a 2900 switch with 24 ports and enterprise memory/software. (What does the WS stand for?) I tried searching for a list of some of the meanings...

jtishey01 by Level 1
  • 519 Views
  • 1 replies
  • 0 Helpful votes

Chris,Is there anyway to see what if what issues are caused by these IOS versions and EOL? I need to put a document together and explain if and why there may be network deficiencies due to the IOS versions. This will help get SmartNet and some hard...

I have a router with 2 FE interfaces : (1) interface FastEthernet0/0=> ip address 137.55.70.1 255.255.255.0=> duplex auto=> speed autoNote : This interface/subnet i hv a DHCP server connected as 137.55.70.2.(2) interface FastEthernet0/1=> ip address...