Switching

I keep getting these messages and am unable to load my 12.2 IOS.System Bootstrap, Version 5.2(8a), RELEASE SOFTWARECopyright (c) 1986-1995 by cisco Systems2500 processor with 16384 Kbytes of main memoryF3: 15025024+968980+947240 at 0x3000060** Image ...

Hi, I have been told that we need to shutdown all unused ports on all the switches. Since this is a lot of work, I have thought about giving this task to the helpdesk but I am afraid of them making a mistake; therefore, I would like to see if there...

hi if i give sh clock it clearly give the IST current time, but in the log messages will display as 5 1/2 less ie.if the IST time is 10 pm if there are logs it show as 4:30pmany guess!!!

Hi allJust a little question about ospffistly, when we talk about neighbours, does it only form neighbour relationships with directly connected routers, and will only directly connected neighbours show in the neighbour table?and secondly when we talk...

I have been given the task of providing the configuration parameters to prioritize VOIP traffic on a 5505.I have never done this and have only bits and pieces that are not work alone.If there is anyone who can point me in the right direction, I'd be ...

Hello,I am assigned to work on a LAN optimization project. Where provide solution to upgrade current infrastructure from various hardware to Cisco LAN switches.My question:1. Is there a tools to measure current performance (LAN utilization/LAN port u...

Can access-list be applied to Ethernet sub-interfaces on a router so that VLANs do not communicate with each other.

Where I can find SNMP MIBs for Catalyst 500G ? With SNMP MIBs is possible to change switch configurations?

Hi all;Today I faced a problem and I want to discuss it with you, I have 3 MLS switches ( SW1:3750, SW2:3550, SW3:3560 ) connected to each other by trunks. SW1 connected SW2 and SW2 connected to SW3. all Trunks allowed all VLANs and ( VTP version 2 ,...

Hey folks. When you have a multicast server (RP) at network A, and create a GRE tunnel from network B to network A to bring multicast to network B. Can you create another tunnel from network C to network B and therefore bring multicast to network C, ...

I would like to know whether the ethernet ports in Cisco 877 are routed ports or switch ports. Can multiple subnets be assigned to the 877 ethernet ports. Are these ports just like the normal ethernet interfaces found on the routers.

Dear All,Can you please help me to solve a problem related to WCCP?. i have two cisco 6509 switches, and i have VLAN 100 configured as a HSRP group, this VLAN comes from external network and the users use it (VIP 192.168.100.1) to access the internal...

For the CPU statistics in Cat6500, what would a good percentage/size value for the entry in subject. And how can I view the CPU statistics.

Im trying to setup a voip lab. I got a 7940 connected to a 2950. The port goes err-disable when the 7940 is powered off.%PM-4-ERR_DISABLE: loopback error detected on Fa0/6, putting Fa0/6 in err-disable stateAnyone knows why?

Hi, We have to configure ip flow-export commands(Mentioned below) on 1721 platform. current DRAM/Flash is 32/16 Please let me know- 1- is these commands are supported on 1721 platform? 2- if it is, please suggest suitable IOS with feature set. 3- do ...