Switching

We are testing router with load of 50 Mb. i.e., router 2800 which is dropping packet when pinging to management interface. Whereas packet transferring and pc to pc ping is not getting dropped.

Good Day,This question involves wireless, but I think it is fundamentally one of switching.I manage the network in a large college residence hall. At present, the resident rooms are connected through wired connections to 2 6509s (sup2 layer 2 only).E...

HiI have a 877 router (IOS advipservices).I wish to set up 3 vlans for 3 differents ip subnets, each one with different policies: 192.168.10.0/24 192.168.20.0/24 and 192.168.30.0/24.So far i've set up 2 vlans.Vlan 1 works fine: fastethernet0 is assig...

I have to clear arp all of the time on a 3750. We have two vmware hosts. Each host has three NICs in them: one for service console, and two for failover. These are set up in a cluster. The problem is that when we move VMs from one system to another, ...

I already have a network setup with a server for internet access with multiple local interfaces with different IP ranges (eg. 192.168.1.0, 172.16.1.0) everything is working fine. now i need to setup a local webserver(eg. xampp) to be localy accessabl...

Hi Folks,I'm getting the error message below on the 6509 :SNMP-3-INPUT_QFULL_ERR: Packet dropped due to inputqueue full

Hi, I have two sites with 3750G's running OSPF connecting to a metro cloud. There are a number of other 3750G's in the same cloud also however only two are having problems. The Input queue is currently showing 1024/75/218/0. The result is that OSP...

We are redesigning our data center switching infrastructure which is currently 6500 based. We are considering 6500/4948, 6500 VSS, and Nexus 7000 as possible platforms for the new architecture. I am interested in hearing feedback from other organizat...

HI All, having a stange problem here.. i had a 2611 with 2 ethernet ports one for LAN and the other terminating on the ISP Internet device (radio bridge) it worked well i has setup a tunnel to the head office and PATTED for internet acess now we boug...

Hello Experts,I have a Cisco 3825 (revision 1.2) with 225280K/36864K bytes of memory running "flash:c3825-spservicesk9-mz.124-3g.bin".There are VLANs configured on the router and each port on its respective VLAN connects to its own Layer 2 switch.I a...

Hi all,We have Cisco 7206V Router at our site.sh ima intATM2/ima0 is up ImaGroupState: NearEnd = operational, FarEnd = operational ImaGroupFailureStatus = noFailureIMA Group Current Configuration: ImaGroupMinNumTxLinks = 1 Im...