Switching

whats the tcp intercept function

I'm using standalone web authentication on my Catalyst 3750. How can I disable the automatic MAC check?Thanks.

I have a set up where I am looping back 3 vlans from an access switch back to same access switch.3 vlans comes out as a trunk, I pick them up as an q-in-q access vlan which I then carry all the way to NOC...at leat that is the idea. the goal is to be...

Hello allIs there by any chance, a command you can use when logged in to a switch/router to discover if there is a dhcp server nearby - and the address of it(meaning a functionality like the small cute program "dhcp find").Best rgds./Jan

hiI have a branch office with 150 user and i need to choose optimum.for the router what is the best choice 2801 or 1841, network should support VoIPwhat is best choice for supporting the 150 user with 1 Gig connection,I have remote site connecting wi...

Hi,I came across a prod environment where the 3560 switch connecting to end hosts do not have 'switchport mode access' command. switchport access vlan 15 is existing but not the other command...So it looks like this..******************************int...

Can I buy a new supervisor WS-X4014 for a older model 4006 ?

Hi, I have a Cisco 857W and I'm using the SDM to configure but whenever I try and save my changes to the router I get the error message that 'running config could notbe copied to startup config of your router'ANy suggestionsthanksDavid

Is there a way to open the archived files off line of the switch that created them?I have tried opening the switch-config-archive.jar file directly using both the Network Assistant software and with a text editor but am unable to do so.Direct connect...

I have a QoS deployment using 3750s and 3560s. As part of the QoS design, we want to mark down excessive BE and other traffic to Scavenger Class. This mechanism works for other classes (NET_MGMT_SERVICES & CALL-SIG), but not for Best Effort. I hav...

My server team has deployed several servers for VMWare use. There is one NIC dedicated for backup, one for vmotion, one for management, 2 for Prd traffic, 2 for iSCSI (netapps). The 2 for prd and 2 for iSCSI are etherchanneled together to a 3750 sw...

The idea is to secure every one port , for every one user to have ip+mac loced on a single port in the entire network. Users witch take ip address from dhcp server configured ot the vlan`int on the 7606 (sup32) with ip helper address witch is talking...

Regarding Failover/ Port channel with 2 6513s each unit running dual sup720 3B, Question with Sup720 3Bs (PFC-3B) running SSO redundacny do I have to configure ether channel? or can I go ahead and just patch between both 6513 supervisors to utilize ...