Switching

Hi to all members, I'm trying to configure a Cisco 2600 router to do DHCP tried following the steps here: http://www.routergeek.net/content/view/37/37/But no luck, my client pc cant get an IP address from the router. Any help will be appreciated. Tha...

Is it possible to track multiple interfaces? And if so can portchannels be tracked?

Hi,Is it possible to format (into Cisco file system) a compact flash memory (no name) from windows to be ready for receiving an IOS into a CCME ?regardsOlivier

Hi.I woulk like to enable SNMP in a Cisco 3750 Catalyst switch. I am doing it with Cisco network assistant 5.I configured a community string, after I enabled trap manager but here I don't know if I must to write IP address of the switch or ip address...

HelloI need to use VLAN functions on a 2821. Is there any solution (IOS and/or hardware) to use it as a switch ?Thank you for your answerJYC / OLM, Paris France

If one wants to check the health of a switch or routers just to see that everything is ok with it, what should someone check.here is my listShow systemShow proc cpu/memshow env all/powershow logWhat else can someone check? Thanks

1)User want to Access W Via A1->L2 Switch->Router C->Router W->2)In present Scenerio B2 is connected to L2 Switch,L2 switch is connected to Router-c and B2 is also connected with B1,and B1 is connected to A1 & A2.2)Propersed Scenerio is that Now We w...

Hi,I have a Cisco Switch which is a VTP server where I create all Vlans. I want to propagate this Vlan info to non Cisco devices (Nortel). I have configured dot1q as Trunking protocol ports connecting between these two Switches . Do I need to configu...

Hi,Does someone know the maximum numbers of nodes that are allowed in a vlan according to cisco? Are the white papers?The maximum size of the broadcast domain.thx,Marc

Hi Sir,I have a Catalyst 6509 with Supervisor Engine 720. It is just newly upgraded to IOS version 12.2(33)SXH1, ADVANCED ENTERPRISE SERVICES SSH.I telnet to the switch and then establish an SSH connection to another router, as follows:C6K_Switch#ssh...

Hi ,Can any one tell me what is the use of Variance command and where all we can use this..Thanks in Advance,Akber.

I was recommended by Cisco to have module WS-X6548V-GE-TX in our future 6500 series switch. My vendor is saying that this module does not show up in the configurator, it shows up as a spare part only. Any ideas what does that mean?

When power up switch it directly goes in the mode that shows ROM>.ROM> ?Commands: r Read memory w Write memory d Dump memory t Test memory c Call address 0 Dump CP0 regs q Quit (return) ESC Reset systemROM>So i am reques...

HSRP is functioning fine, however the standby router is responding to requets with an ip that is neither its own or the VIP of the HSRP group.Is this normal behaviour?LBC-YMQ-RTR-01#.Feb 12 21:17:20.134: IP ARP: rcvd req src 172.30.4.4 0030.80ce.b061...