Switching

i config static ARP on switch , when host would like to solve the mac address if ip address match , the switch will return the mac-address instead of the destination host right ?Thanks

I have a 6500 with a WS-X6724-SFP blade in it and IOS 12.2(18)SXE3.I need connect a 3750 switch to one of the SFP ports on the blade. This 3750 switch will have PC's and IP phones connected and will have a data and voice vlan.data vlan = 6voice vlan...

I am having some problems with a stack of 3750's I have and connecting a voip phone to a port on them. I have the ports set up correctly and I believe the phone but this is the first time I have connected a voip phone to a 3750 stack. Has anyone done...

Hi, we have the following routes in our load balancer:CSS11501# show ip routes prefix/length next hop if type proto age metric------------------ --------------- ---- ------ -------- ---------- -----------172.16.20.0/24 ...

Hi all, when marking traffic, i know that say if i want to prioritize voice, the phone actually marks the packet itself, if the device does not mark the packet how can i do this ?

Dear Sir, I had a problem on my network. That I had a Cisco device Pix 506 E firewall. This device is connected to my network with Router Cisco 1700 and switch panel 3Com.The Pix 506 E firewall is hang-up always and disconnects all users from the Int...

Where do I go wrong?We have an older Catalyst 2950T in our LAN, which works ok. We need more LAN-connections, so we bought a new Catalyst 2950 and mounted it on the same rack. I cannot get these devices communicate:When either is booted, the other sw...

We have a cisco 3845 router. There are 4 PVDM modules in the router out of which some PVDM's has gone faulty and is not forwarding any traffic.We need to identify the PVDM's which are faulty.Is there any way to check it or do we have to go for checki...

Hi, I have done a bit of reading on the three abbreviations above and still cannot quite wrap my head around what they do and what they are used for. If someone could explain to me what each one does and real life examples of when they would be used ...

Dear all,I have 3550 switch connected to lan.By logging into switch, Can I able to know the IP addresseses and respective Port details? what is the command?pls help me

I have a 3560 switch and a 2960G switch. They are both in separate buildings, connected by Gigabit GBICs to an Allied Telesyn switch via separate fiber optic paths. When I connect the 2960G, the 3560 stops communicating with the network. There are no...

I want to turn EIGRP on 6500 switch.Switch is running IOS 12.1 code.Does anybody has either sample config or a good lik?Thanks,

Hi everybodywe have too many servers in our office.we want to have 1 ip with load balancing for example for 2 application servers . so, i\our goal is if we call this ip address, the load balancer divide the request between these servers.I think SLB i...

Hi team, i need to know how erase the configuration file via rommon in catalyst 6509. I change the configuration register to 0x2142 but the router back to load a configuration file.Thanks