I need to force anyconnect client due to security reasons as it denies local LAN Access, enables firewall rules, inserts routing table entries, and forces DNS by default, where openconnect client does not do this by default and is subject to the end ...
Forum Posts
We have a DX80 that has the error message "Microphone not detected" displayed at the top of the screen.Remote System Diagnostics check does not show any issues.Configuration shows "Input Microphone Mode: FocusedWide" and "Microphones Mute Enabled: In...
Hello,I am trying to do a bulk update to 9.14 via TMS. On the system upgrade, the endpoints(SX10) shows up as "not supported". TMS 14.13.0, endpoint are on CE9.8 and register to CUCM. I am not sure if I am missing a step
We are planning to install CMS in our environment and i need to confirm if a user can share content and give or request desktop control for the other users, or its only content sharing?
Hi to all I have an SX20 Cisco TelepresenceSoftware version is: TC7.3.15.a9f4c3a I have this issue: WARNING: Default Call ProtocolThe default call protocol is set to H323, but system is not registered on that protocol. The system may not be able to m...
hi, we have a cucm and CMS on the central site and we have sx 80 on the central site and 9 other sites , other sites have 6 or 2 mbps, the problem is that the video quality isn't good with a 3 way video, so i'm pretty sure if it's a 10 way video ther...
Dear All, We have CMS 3.1 setup spanning sites in US and Europe. All these main sites are going to be connected over SD-WAN setup and goal is to make sure following- within call bridge group, nodes must be within 100ms- database cluster, nodes must b...
We got our first room kit mini (RKM) and its setup in a room we previously had a SX10 in. The main video flickers. Typicaly one would suspect that its a problem with the florecent light in the room. I have tried seting the "Powerline" setting to the ...
Hi Guys, CMS 2.6 I was wondering if its possible to remove the signin button only for the guest url. When I set the "SignIn" parameter for the webbridge, it disabled the signin for both my "join.local.com" url as well as my user sign in page "cms.loc...
My SX80 has no installed options keys. I must reconfigure the SX80 to use SIP using TLS only. Without the encryption option key installed SIP will not work with TLS. How can I get the encryption option key installed on my SX80?
In the Mobile and Remote Access Through Cisco Expressway Deployment Guide (X12.5) > Supported DeploymentsCurrently, ICE passthrough support exists only on MRA deployments. It is not tested and supported on the following service deployments:Cisco Webe...
Hit team , is there any way to invoke DTMF condes when adding participants to the meeting? The cenario is i have one running meeting and i need to add an external participant behing a mcu our like a ivr and i need to send dtmf codes to select partici...
Does CMS support SIP session IDs if yes from what version onwards
Resolved! Webex Codec Dual Display settings
Hello, I am deploying Webex Room Kit Pro and Webex Room Kit Mini codecs, with dual-displays. I left all the video options on "auto", and I notice that when we enter a call, the far end video is always displayed on the lowest connector, and the displa...
Hi Experts,I installed Cisco TMS 15.13, installation is Ok , but i'm facing a pop-up error : The Ajax Request Failed...TMS ERRORCOOKIE{FF44A030-7F95-461C-8065-615FCE335F7B} var TMSError = { toggle: function(tableId) { var errorTable = $(tableId); err...
