is it possible for any one to add more than 24 IP Phones in 2801 through Call Manager express or srst
is it possible for any one to add more than 24 IP Phones in 2801 through Call Manager express or srst
Hi! When I console into IPVC 3515 MCU, I cannot get any menu prompt to reset the box to factory default. Instead, I see lots of error messages on ErrorPath display continuously. Any idea how to fix this?Here is the output after booting up:Main...
how does an ip phone recognize the network that belong to and start the dhcp process when it pluged to a switch?the only information that learn is just a voice vlan ID. Is it he register mac address to the CCM or something else?thanks
hello i have the follow dilemma. a 3550XL has a voice vlan 10 , a data vlan 20 and an management vlan 99. assinging the vlan 10 as native wil remove its tagg across the trunk ports. also cisco recomends native vlan not be the same as management vlan...
Hey All,I'm trying to associate a device to a user from CCMAdmin and I keep getting a Error No: -1009 when I try it. I tried a search on google and came across one bug check fix for ciscoatguid. I tried the fix and to no luck it hasn't resolved yet. ...
Will VT advantage work when my client does not have a transcoder configured. How will performance on the video be with out transcoder configured. ALso, does any one have documents on the details of what we can and can't do with VT advantage. For ex...
i need to use half of the channels for the inbound calls and half of the channels for outbound calls. What would be the Configuration?
Are the video packets tagged by default? If so what are they tagged as?I need to set my QoS- cameras work great easy set up but my video is a good minuate behind my vocie right now.Thanks,Andy
Hi All,Please advice me what I wanted to do is possible or not.I have 128 kbps Bandwidth leased line circuit to my branch office in Singapore and I would like to dedicated assign 64 kbps of my bandwidth for VoIP traffice. The rest traffic with go wit...
Hi,Has any one implemented VT Advanatge with Multiple Call Manager Clusters and Video Calls accross Gatekeeper Controlled Trunks.Thank you.
md110--(pri)--router3845a------router3845b--(fxo)--another pbxmd110 user call pbx user can hear ring back tone ,and everything is ok.but when pbx user call md110 can not hear ringback tone!3845 ios is c3845-spservicesk9-mz.124-12b3845a:dial-peer voic...
I have CME running on a 3845 router with the latest CME code and correct IOS. When a user dials out to a cell phone they do not hear any ringback but are able to connect to the cell phone and voice call proceeds fine. The VoIP user just never hears...
Hello, I have a MCU 3515 and a Cisco Callmanager v5.1. I am trying to register the MCU on my callmanager adding the mcu as a conference bridge, I have setting the tftp and callmanager using the MCU web interface but the CFB is in status unknow in the...
Is there anyway we can remove the Cisco logo from the LCD and replace it with out company logo, alternativly remove it all together.ThanksBrendan
With a call comes through in the Hunt Group, the call is broadcast to all the 7960's w/7914s. The first line shows busy on all 7914s. When a second call comes in, the first line of the 7914 rings at one station only, as if the line were idle. If a th...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
07-07-2024 01:38 AM | ||
06-27-2024 06:47 AM | ||
06-10-2024 11:20 AM | ||
06-10-2024 11:14 AM | ||
06-10-2024 09:51 AM |