Experts,
is it possible to use a single vcsc connected with a vcse ver 8.11.4 to do both mra and to do b2b at the same time? If so what is the requirements?
Or you have to have one vcsc/vcse for mra and another vcsc/vcse for b2b ?
Hello Dears We have one main office and 7 regional offices and we want to connect all of them through video conferencing solution . all the offices has connectivity to internet and there is no VPN or any other kind of connectivity with our main offi...
HelloI use cisco x20 devices for video conference. I just updated software version from TC6.3.3.a497a66 to TC7.3.6.ea51021. And then have a problem:When I scheduled for my conference with 3 rooms, TVC(the bridge) called out to each of the conference ...
We are running SX20 on version TC7.3.6.ea51021 and MX 300 on version ce 8.2.1 with CUCM running on version 11.5.1.14900-11 and unfortunately facing the issue with auto answer switching back to "off" state automatically. Can anyone help?
For a small installation of TMS, SQL Express is still supported, right? The documentation for TMS 15.7 says it only supports SQL 2016 SP1....but the only version I seem to be able to get from Microsoft's website is SQL Express 2017. Is this support...
Hello,I have a UC solution, CUCM, IM & P and CMC, i have Jabber users and TP endpoint (IX5OO, DX80 ...), i need to disable the ad hoc conference just for cisco jabber, how can i please.
So after a factory reset of the DMP, I can no longer log into the web interface. The splash screen shows its IP when rebooting the DMP. Before a factory reset, I was able to log into the web interface just fine. Now, it's asking me for the password. ...
Hello Guys,I just bought a used Cisco MX200 but I have no idea what is needed for it to work and how to setup it up for dialing.I am an absolute beginner. This is what I have:- non-static broadband 200M- IP telephony subscription- a working MX 200.Th...
Hi there
We have S4B interop using CMS spaces but really want calling between external S4B clients and internal Jabber users, using CMS as the gateway.
According to this lab (https://cmslab.ciscolive.com/pod2/edge/s4b) it requires a forward all ...
Afternoon community,
We're in the process of seeing if the DX80 will satisfy our STIG vulnerabilities. Where I seem to be stuck is with the network settings. We want to hide all instances of the IP address being displayed without a pin or password....
There’s no content sharing option and even HDMI cable is connected there’s no response.
Can someone advise what could be the issue ? Is it software version issue.
The software version i'm using is ce 9.1.2
Hi Team,
Was hoping that someone might have a nifty idea of how to approach an issue my team has run into while deploying a Room kit plus on CE 9.3.2.
We are using Panasonic TH-65PF50W monitors as we would like to life cycle them. Conferences conne...
I'm having trouble connecting our SX10 to our TV in our conference room. We are connecting it with an HDMI and PoE. No matter what HDMI input it is in, nothing shows up on the TV. It is a Vizio. Any troubleshooting suggestions are welcome. Thank you.
Hello,
We've had an issue with one of our conference rooms where the video/call seems to drop between the 40 minute to 44 minute mark when dialed into a WebEx to an outside party.
One of the logs I grabbed shows this:
2018-10-31 13:32:32 Use...
