Good dayWe are looking for a standalone toolset (preferrably certified) that can perform a "site readiness assessment" and stress test for video. The tool should include reporting on these elements.
Hi,I have a Cisco 4220 MCU. I want to know if I can have more than 20 participants in a conference without having to cascade 2 conferences. I checked it, but only the first 20 participants are connected with a video call. The remaining participants a...
Setting up a dial plan on port A (internal) to allow a short code to be dialled to push off to an MCU hosted on a Private WAN accessed via port A. Calls coming in from CUCM 6.1.2 from IP phone with VTA. I have configured a test dial plan as follows...
What is the power consumption of the 8742HDC Set Top Box. It accepts 12VDC, but no where can I find the power. Elsewhere on the Internet one individual indicated 23 Watts. Is that accurate?
As per the release notes located here:http://www.cisco.com/en/US/docs/telepresence/cts_manager/1_8/release/ctm_rn1_8.html#wp72803It says that CTS-MAN supports multiple Active Directory forests since 1.6.x.Maybe I am being paranoid, but I am interpret...
Hello,I read the TMSPE Deployment and tried to find the TMS Provisioning template schema for new Movi 4.4, however, I couldn't find anything from cisco.com.Please help me where I can download the movi and the other endpoint's template schema?Thanks, ...
Hi,I have integrated Lync 2010 and VCS X7.03 using the B2BUA. It is all working fine except from Presence. From a Lync client I can’t get any Presence information from a VC client, a Movi client of the MCU Auto Attendant. From the documents I have be...
Hi everyoneI have installed a surveillance 5010 camera in a costumer. When you connect to the IP camera using a browser, the camera shows you a stream view with the video, login, etc. This costumer requierd when anyone connect to the camera, the cam...
Can you run TMSXE 3.0 and 2.x at the same time? My thought is to move one mailbox to 3.0 in order to test before moving all accounts. I didnt know if anyone had done this or if you just had to hard cut to TMSXE 3.0.
Dear Member,I have a customer running CCM 8.6 and want to deploy video conferecning, all the end device is IP Communicator with cam or CP-7985.I have the following question?if deploy Videoconferencing 3515 MCU, can it support call from sip trunk? See...
Hi all,We have a VCS with X6.1 with Profile and EX Series registered, when i tried to regsiter a new one iam getting registration failed and in the VCS logs i could see status rejected for both H323 and SIP. Reason: "Not permitted by Policy".The exis...
Hello I tried to created a call policy rule on our VCSe to stop unwanted call a tempts trough our VCS.I use a GDS (Global Dialing Scheme) dailing scheme connected to the Dutch national gatekeeper organization. The connection is made by using a Neighb...
Hi,We have MOVI 4.2 and TMS 13.0.2I built 2 sources :* Movi Users* TMS EndpointsBut MOVI doesn't resolve multi number or alias for an Endpoint.In my case i have E164 / URI / RNIS Number sometimes--> So for each number or alias create a line in the MO...
I just upgraded to 7.1 from 7.0 and now my AD Administration Authentication won't work. It worked before the upgrade perfectly. I get this error in the Event log of the VCS:May 18 17:37:55web: User="mjefferson" Event="Admin Session Login Failure" S...
