TelePresence and Video Infrastructure

Unable to view real-time stream/programs from it/tv viewer on Windows 2000 and Windows XP workstations. Currently using IP/TV server (3417 Started Kit)to stream video. However, I'm able to view stream with Windows NT 4.0 Clients with no problems.Mu...

Here is my problem:[pstn] --- [Inter-tel PBX] ---E1----(VG 200)-----VPN------Callmanager/another GWVG200interface Serial1/0:15 isdn switch-type primary-net5 isdn protocol-emulate network isdn incoming-voice voice isdn T310 60000Every time when I call...

Hi,Has anybody tried this new feature with video, not only with voice? It would be very good to have something like this for video because h323 proxy does not have enough flexibility in terms of separating video networks between different companies w...

Is there any way to change the idle url on the 7940 phones? I am using call manager v. 3.2 (2c)Thanks!Mary

I have 2 ATA-188's. I am trying to create a PLAR on my LAN/WAN. I need help with the configs. I have static addresses. I can access the admin via the web browers. I have not been able to get a dial tone on either phone... Not sure what needs to ...

Our C drive on the CCM Pubilsher is almost full. I have tried deleting what I thought were unnecessary files but only 500mb are left. Has anyone run into this problem? Any suggestions on what I should delete? The MSSQL folder is 2.5GB in size. Sho...

Got a 3640 with 12 voice interfaces using h323 back to my call manager. Is there any way to group the pots ports on the 3640 so I can use a single dial peer instead of 12 dial peers?

I have a customer using the Eriksson MD110 with E1card running on MFCR2 Signal. We would like to test on Cisco2620XM with the vwic-1mft-e1 with the aim-voice-30 to integrate with the PBX box.Is the MFCR2 a propriety signaling by the Eriksson? Is Cisc...

Hello,We have a PIX that sits between the Data VLAN (PCs) and the Voice Vlan (Phone and CallManager). Does anyone know what ports (TCP & UDP) we need to open on the PIX to allow the Attendant Console app to run from the Data VLAN (PCs)?Thank you,-Mo...

I am trying to make VoIP call with sip between two IOS router running 12.2(15)T H.323 plus feature. When I try to make call through the SIP proxy server, it fail. The problem is how can I register the prefix my router user agent responsible for to th...

We have deployed IP/VC 3510 with endpoints on WAN links. Customer wants to have following feature during video conferencing:The initiator at HO should be able to see all four remote particiapnts. Remote Participants need not see all the participants....

Hi,Does the Cisco Gatekeper any digit rewrite capability to be able to rewrite any incomming call with another prefix before redirecting to another gateway or gatekeeper?Thanks in advanceHooman Parta

When implementing a Cisco IOS MCM with proxy functionality in a co-edge model (i.e. in parallel with an existing firewall, so the firewall does not have to inspect the H.323 traffic), what would be a suitable ACL to apply to the external-facing inter...

Hello, I'm trying to implement Qos over video. I currently have 2 Tandberg video units, one at each end of a T1 circuit. I have tried LLQ but some reason it doesn't work.. Could someone can send me the Qos configuration please? Thanks in advance Tbu...

Hi All,My company plan to use VoIP to interconnect the remote-site. The traffic will not be very high. I am thinking about to use 4 FXO ports or use E1 to connect to my PBX. I am afraid that if I use E1, the PBX is not compatable with the 2600 router...