I am trying to install ucs director 6.5
Successfully deploy the OVF, but after I power on the vm the centos OS is not booting and immediately i get an error wrong fs type, bad option, etc...
After troubleshooting an issue from an already open question, a new issue has arisen. I am opening a separate question as this problem is new and I figured a new question should be asked about it.Following the instructions from this question, I re-a...
we are having CISCo UCS environment(8 ports backplane ports-->IO module) where im seeing the 9th port(i.e in chasis 1--->1/1/9 port is belonging to "SAM management VLAN".What it is referring"
we are having another CISC0 UCS environment(16 ports backp...
Hi, This is Jaeyul Kim.
I have some questions.
I support to 6248 FI and In my customer site, There is 16G SFP to 6248.
I already known that support FC 4/8G SFP, but I have done check unsupported 16G SFP entered this product.
(not print part number...
Hello-
Today while performing an upgrade from 2.2(6e) to 3.1(3b) we had a major outage during the reboot of FI-B. The outage cleared after the 10 or so minutes it took for FI-B to restart.
At first, I thought we maybe had some of our servers config...
I read the symptoms and conditions of this bug, so I'm clear on that. High memory usage cause SNMP not to work. OK, then.
My question is why would diagnostics, such as SNMPWalk or 'Test Credentials' in my NMS system, work when actual polling does not...
Stumbled upon an interesting misconfiguration which is making me curious about how the boot from SAN primary/secondary method functions.Array has a boot LUN for a server at targets available as LUN ID 1 across all targets.Boot policy for a vHBA has c...
Hi all,
I am doing an implementation on behalf of a third party who advised me that they ordered 2x copies of MS Windows Server 2012 Standard R2 off the Cisco GPL.
In the delivery I received 2 copies (media) of Windows Server 2012 but no license keys...
We encountered board controller activation failed on one UCS blade (B200 M4). Is that possible to downgrade from version 12.0 to 7.0? Others blade running version 7.0 with no activation issue. Kindly advice.
Regards,
Zulhadi
Hi there,
I have a new B200M4 server without HD. Trying to bring it up using iSCSI boot. I can associate the service profile successfully, but I saw the following major faults: "Adapter host interface 2/1/1/1 link state: down".
Any idea on how to o...
Hello,
I need to find the NTP server status in a UCS B server status from the rest api (visore utility) and I am looking at adminState {=enabled/disabled} in commNtpProvider. What does this property indicate? If it is not meant to be read as status ...
Hi Support,
We have in stock the following memory:
Part Number: UCS-MR-1X162RY-A=
Description: 16GB DDR3-1600-MHZ RDIMM/PC3-12800/dual rank/1.35v
We want to use it to upgrade servers listed below to 64 GB.
UCSC-C220-M3S 2x E5-2620, 2.10 GHz 6 cor...
Hi,
Can someone tell me how media and license (activation/registration codes) are delivered for:
VMW-VSP-STD-3A VMware vSphere 6 Standard (1 CPU), 3-yr, Support Required
MSWS-12R2-ST2S Windows Server 2012 R2 Standard (2 CPU/2 VMs)
Is it physi...
When deploying a Service Profile from a Template in UCS Central you can specify the "Advanced" option in the Service Profile Naming Convention. This allows you to create Service Profiles and specify where to start numbering and how many digits to u...
Hi,
Anyone here can guide me how to activate additional purchase FI port license in UCS 6248UP? Currently in the UCS 6248UP we have already 16 activated FI port and now we purchased additional 4 FI port license for to apply at UCS 6248UP. Hope anyone...
