Unified Computing System Discussions

Hi, We have some UCSB-F-FIO-785M cards from B200 M3 servers and are wondering if they would also work in B200 M4 servers? I can only see the newer type cards in the B200 M4 pdf but was wondering if anyone tried it (http://www.cisco.com/c/dam/en/us/pr...

Hello Folks, We have a customer based which is shipped with C220M3 servers. These servers comes with G200 Graphics inbuild as per the spec sheet. Anyone could you please help me to understand how we can show this to customer that they are actually pr...

For UCS C-220 M4 SFF Server:- I am using 4TB*2=8TB HDD. I configure RAID 1. UEFI boot option enable already. I am trying to install MS Server 2012 R2 operating system in server. When I try to make partition 250 GB for windows it create, but automatic...

Hello. I have to upgrade firmwares on 11 Blade servers and IOM in 2 chassis that is connecting with new Fabric Interconnect before adding the 2 chassis to existing Fabric Interconnect (different domain). ESXi will be installed on the server after at...

Hi there,We have ordered Cisco C220 M4 servers with Cisco UCS 12G SAS Modular RAID Controller. Also we have ordered Cisco 12Gbps SAS 2GB FBWC Cache.According  "Cisco UCS C220 M4 Server Installation and Service Guide", I can config these RAID levels:0...

Hi all,I was wondering on how do I go about getting my link on IO Module backplane.My set up as follows ..7 B200 server and 1 B440 server in a chassis.  All of my backplane ports are online except for 1 of the B440 ports.  It just has a link down.  N...

First and foremost, I understand that what I'm about to describe is not a bug, but normal behavior.However, it caught one of our customers off guard when attempting to follow the UCS Central Operations and Best Practice Guide.I just think the issue i...

First and foremost, I understand that what I'm about to describe is not a bug, but normal behavior.However, it caught one of our customers off guard when attempting to follow the UCS Central Operations and Best Practice Guide.I just think the issue i...

Hello, I Having a valid Keyring certificate in my UCS Manager but when i select it in Communication Services e continues saying: "Keyring UCS certification verification failed. Use keyring having a valid certificate.". any one can help?  Thanks in a...

I'm in process in upgrading in upgrading to UCS 3.1 code.  I have older Chassis 5108, PID N20-C6508.  I have older 2104XP , PID N20-I6584 I know they don't work in 3.1 code.  I have Power Supplies PID N20-PAC5-2500W,  I don't if they will work or not...