Guys;
I am unable to install Esxi 5.5 in Cisco UCS220 M4S. The said server wasn't pre installed with any RAID configuration so i created RAID 5 however after installing Esxi it displayed a purple screen which says "Could not start pcpu 1; TSC sy...
Hi all,
I could not find anywhere any reference for that, so i am giving it a try here.
If i download the latest ISO from vmware web site which is 6.0 update 2.
it has these drivers in it:
Download VMware vSphere
Cisco enic 2.3...
Hello everyone,
I'm in the planning phase of upgrading our Cisco UCS infrastructure and I would like to use the latest release that being 3.1(1E). I would like to know if anyone has had any issues with this release? Would anyone not recommend upgrad...
We have (4) power supplies in a 5108 chassis and have made no connections to the FI as of yet. We connected all (4) supplies and only one shows a 'green' status. All of the others display a flashing amber light.However, if we plug in each supply on...
I am having a problem getting boot from SAN working. I have a UCS B series. I have configured fiber channel and it is up and working. If I boot from a vmware CD, I can see the SAN and install to the proper LUN. When I try to setup the system to b...
currently 5548 is core and FI-6248 connects to Nexus 5548. We have to introduce nexu 9504 as core/spine and connect 5548 to 9504 as access/spine switch. is it better to connect FI-6248 to 9504 or 5548? what's recommended design?
Hi Team,
My customer run into issues on UCS standalone cluster due to bugs CSCuj10535 and CSCuq83761
The UCS cluster is running with 1.5(7a) firmware currently
So we are planning to upgrade the firmware on to problematic server only. So my query ...
HI all, I am getting "SFP validation failed " error after inserting GLC-T connector in 5548 nexus switch.Is thre any seperate config required for GLC-T connector.Regards,Ajith
im having a certain bug with my ucs c220 m35 and i need a certain patch , the issue is that there is previous patches to the one i need so do i need to install all the previous ones or i can install the one i need right away?
i need to change the network adapter on my ucs c220 m35 vm machines from E1000E into vmxnet3 , can i simply delete the network adapter on the vm machines and add the other type? can it cause the vm machine to fail?
We connected an external USB drive to the doogle of our UCS B200 Blade. We have OVM Server installed on the blade, but the USB drive is still not visible. Do I have to enable a specific setting on the service profile? We have checked enable on USB...
Hello,
New to networking implementation and design. Having issues with CIMC inband issue with UCS-B series.I setup a packet capture on the fabric interconnect A uplink. I can see ARP for the CIMC inband IP address. But no reply from UCS. I disabled ...
Hi folks,
In the "UCS-C220 M3" side, we are using the 10-GE SFP+ Module "CDE2-SFP-1WSR" (for Intel X520 Dual Port 10Gb SFP+ Adapter), so we want to know wich "10-GE SFP+ Module" we have to use in the Switching side (for Cisco Nexus 7700)??
The only d...
Needing to decide - we want/need a simple/clean upgrade experience that can occur in one pass, so that we can install new B200M4 blades and upgrade ESXi hosts to vSphere 6 u2
The download tool seems to recommend 3 possibilities:
2.2(3j)
2.2(6f)
3.1...
