Unified Computing System Discussions

 While I am unable to start nested VM on VMWare planning to install Ubuntu on a bare metal UCS, also would like to have ESXi as a second boot option. This UCS-C has four raid drives and planning to use one for the Ubuntu and rest for the ESXi.Would a...

Hello,I'd like to know recommended option to monitor UCS, specially for historic traffic flows, bandwidth occupation and so on. UCS Manager can't provide this. Is it possible to track these sort of things with UCS Central? What about UCS Director? Ma...

What is the meaning of the following message in call home ?System Notification from NN62FIP16-A - inventory:full - 2014-05-26 22:04:47 GMT-00:00 system inventoThis has been discussed before, but I can't find it.

HelloI am running a few different cna's (vic 1240, vic 1280 & M73KR) (2.03c) with esx 5.0 and windows 2008 r2. In either B200 m3 or B440 m2. fnic 1.5.0.8 and enic 2.12.22 in esx. What would windows use as the driver for any of the above cna's? In the...

Hi,Has anyone seen where SNMP stops responding on a UCS-E after sometime?Disabling and re-enabling SNMP did not resolve issue, but restart of CIMC did. Versions: UCSES.1.5.0.2 (Build Date: 05/15/2013)CIMC Firmware: 2.1(1.20130726203500)The 2.2 releas...

In vsphere, I see i have some hosts have vhba1 and vhba2 but some other hosts shows vhba3 and vhba4 All the hosts are using the same service profiles and have 2 vhba per host why is the number not the same ?

Should the enable failover box be checked or should it be unchecked and just use vmware failover instead?

Hello,I'll be doing a Hyper-V Core 2012 installation based on B200M3 and I have a few questions:- Is it supported (or a good idea) to boot Hyper-V2012 from SD (flexflash)?- is there a documented procedure to install the OS in the SD flashes? Apparent...

UCS Manager 2.2(2c) “El Capitan MR1”Release NotificationMay 23, 2014                                                                                                                                                    DCG is pleased to announce the rel...

When I go to the UCSM LAN tab under Internal LAN, I do not see any port channels there. why is that? but if I log into the ucsm cli, I see some   sh port-channel summaryFlags:  D - Down        P - Up in port-channel (members)        I - Individual  H...

Welcome to the Cisco Support Community Ask the Expert conversation. This conversation is an opportunity to learn and ask questions about Cisco C-Series Integration with Cisco Unified Computing System® Manager (Cisco UCS® Manager) with Cisco experts V...

I am wondering if it is possible to install VMware tools on the UCS Central appliance? We're running version 1.1(1a) of the appliance. The OS type appears to be RedHat, but the CLI is not the standard linux interface, so I don't see a way to mount an...

We have setup netflow according to the docs but are not seeing any traffic flow.6248's running 2.2 MR1 betaHost is ESXi 5.5, using a C220 M3, VIC1225.  Have set monitoring for vnic0 and vnic1 to an external monitor.  VMs are communicating to other ho...