Hi,I am looking for a help. When I am cloning a VM, I am seeing that network interfaces are not getting propogated to the new cloned VM. I am using B200 M2 blades.I am cloning a VM with RHEL 6.3.Appreciate any help on this.Thanks,Santhosh
So we are having a debate surrounding the network configuration/design with an upcoming UCS implementation across 2 or 3 Data Centers. I think the count is 6-10 chassis per site (active/active) plus other related devices.... I would like to know why ...
hi I know lot of users is using NLB & My concern is if everybody can chip in with their idea we can make this question & convert to the document .We are trying to setup the Microsoft NLB with UCS Enviornment. I have 3 Chassis connected to 6120 which...
Is it just me, or is the download site not working for UCS emulator? The URL is http://developer.cisco.com/web/unifiedcomputing/ucsemulatordownload. It asks me to login, then accept terms, and then returns me to an error that the r...
After upgrading to 2.1(1b) I noticed a new entry when creating your dynamic vNIC's/templates (see attached pic). How is this different from the previous implementation of the firmware?Thanks
Setting up a new set of 6248 FIs running 2.1(a) – HA never becomes ready – After some investigation within NXOS mgmt 0 reports as down “link not connected”, even though I am connected on that interface to both FIs and the cluster IP - I have changed ...
Hi, Cisco Experts:Can I have a definitive answer to the following?q1. EMC mentioned that they do not support FC Port Channel & Trunking with regard to our UCS Fabric Interconnects/MDS/VNX5300?Is that any truth in that?We are trying a Cisco UCS soluti...
Hi all,I have a Cisco UCS C210 M2 with an LSI MegaRAID SAS 9260-8i with 8 HDDs connected.I'm having trouble getting the system to boot off the HDDs.I have configured BIOS to use the Onboad SATA Controller in SW RAID mode (this is the only option that...
I believe I know what the issue is, native authentication is pointing to LDAP. However, I need a backdoor before making any changes to assure I am not locked out.
I cannot seem to get VMware ESX 5.0 host to see EMC VNX5300 through UCS FC setup. It does see the EMC storage through iSCSI.This is our setup2 - WS-C3750X-24T-E2 - UCS 6248 UP2 - Cisco UCS Chassis2 - EMC VNX5300 FC - Connects directly to Fabric Inte...
