Hi experts,Is it possible in FI to connect storage switches directly to fixed FCOE ports rather than having FC expansion module.Thanks,Mazhar
Hi experts,Is it possible in FI to connect storage switches directly to fixed FCOE ports rather than having FC expansion module.Thanks,Mazhar
Hi, I am configuring a blade presently that has a VIC (M81KR) card installed.In the UCS profile, I configured 4 vNICS- 2 vNICS for Public (One on Fabric A, one on Fabric B)- 2 vNICS for Private (One on Fabric A, one on Fabric B)I have installed th...
Documentation says that max supportable RAM on this blade is 192GB or 12*16GB DIMMs.Could anyone tell what is part number for 16GB DIMM which will work on B200 and will not log an error about not able to find FRU info?Thanks
First off, thank you all for the great community here. It's a wealth of information, always great to see Hopefully someone can help me with my problem; I have been able to find quite a bit of info here to get me, I believe, 95% of the way. I think I...
Hi,I sanboot installed redhat 5u7 x86_64 os on UCS, and then mapped 15 volumes to run IO, os will become kernel panic less then 2 hours.then I have to force power cycle the server.The card used is M81KR.Does anyone what is the problem? Thanks.======...
Hello,I've been trying to figure out how I can check what VLANs I have assigned to each service profile through CLI. I have no trouble viewing this through the GUI but there's just so many clicks to verify each server (10) with its NICS (2).Anyone kn...
Cisco pushes M81KR card saying that there's no reason to use anything else. What about systems with iSCSI storage (ESXi boots from local drive, VMs are on iSCSI storage, no iSCSI boot)? Is there any performance advantages to using BCM57711 card? It h...
Hi All,We tried to install Meeting-Place 8.5.2 on svl-ucs-02 and encounter the VMware Licensing issues.As per current Licensing provided by Cisco for Meeting-Place bundle on UCS C210-MT server, we have 8vCPU on each UCS server, but it supports only ...
Hi All,is it possible to install non-cisco memory and/or disks into the UCS devices? I find the cisco memory/disks are amazingly expensive down here in Aus and as a startup we''re trying to reduce our costs. Any advice appreciated in advance. Thanks....
I quite urgently need the following cable -> Cisco R200-SASCBL-001=Unfortunately I cannot find a reseller in Germany who has this cable on stock The estimated shipping time is more than three weeks - that's too late Now I am looking for a cable that ...
Hallo, I want to Integrate the UCS Manager into the Active Directory. I read other discussions about it and followed the instructions on http://www.cisco.com/en/US/docs/unified_computing/ucs/c/sw/cli/config/guide/1.1.2/Cisco_CIMC_CLI_Configuration_G...
Hi all, Could you please tell me when to use multicast optimization in UCS system class configuration?Is there any use case?ThanksJagath
Hello,I am looking for a little clarification on the Nexus 1000v with UCS and ESXi. I have my VSM installed and have defined my port group for packet control and management.My question has to do with assigning the VEM physical interfaces. Since the...
Hi All , Could you please help me understand the output of the following command : ucsm-B(nxos)# sh int brI have a few queries on the interfaces number eth1/1/1 to eth 1/1/8 :What governs the naming convetion used for the ethernet ports starting eth1...
If my UCS servers are running ESX, and I go to that server in my UCSM, then click on the virtual machines tab, I do not see anything. How does this process work? Is there a way that the UCS needs to know about the VM guests inside of the ESX host?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
Subject | Author | Posted |
---|---|---|
04-19-2024 10:22 PM | ||
04-16-2024 02:26 AM | ||
04-04-2024 11:22 AM | ||
03-18-2024 06:52 AM | ||
02-27-2024 07:34 AM |