Hi all,We sell one server C200M2 to our customer and after few hour he call me and that the server has Alerd Light On.The Power Supply Fauler (PSU) and System Fault LED is light.I make test in our warehouse with the same model server - but the pr...
Hello,I'm confused around the ECC feature in Cisco memory modules. I've seen in C-SERVERS data sheets the words "ADVANCED ECC", whereas I've not seen such words in B-SERVERS data sheets. Does that mean blades are not ECC compatible? I'd also like to ...
Hidoes SFP-H10GB-ACU7M and SFP-H10GB-ACU10M support FCoE if they are used in Nexus5000 running 5.0.3I heard rumors thats it could be that these active Twinax do not support FCoe because they could net reach the BER which is necessary for FCoEKRHubert
Hi all,Our customer buy one server C200, and now he want to put RAID controler Adaptec ASR-2405, but this controler don't work.Is there some reason that RAID controler is not working?Can you give me some table with support third-party RAID controler...
Hey,Have an issue that's doing my head in a bit. Here is the setupCisco UCS 2 x Blade Chassis consisting of two fabric extenders in each. Port 1 of each fabric extender going to Fabric Interconnect A, and Port 2 of each fabric extender going to Fabri...
My reading of the documentation is that in order to use the UCS Manager with a standalone C series server (C200, C210 or C250, anyway) is that in addition to UCSM 1.4 and a pair of 6108 fabric interconnects you also need a pair of 2248 fabric extende...
Hi Experts,DESIGN : we have 2 fabric interconnects and 2 san switches conected to EMC clarrion in redundant way. fabric interconnect A connects to SAN switch A fabric interconnect B connects to SAN switch B we have 2 vHBA for each service profile on...
We are running UCS Manager 1.4.We have enabled SNMP traps as we need to integrate with enterprise systems management.When an alert occurs that generates an SNMP Trap, we are receiving 4 identical traps for each alert. Four when the alert goes active...
Hello,While I'm waiting for TAC and Development on this, I wanted to see if anyone else might've seen this behavior. We have a new UCS Chassis with 3 B230 M1 blades, fully populated with memory.This past weekend, one of the blades started reporting ...
We have a client that needs a single nCipher SSL decode card...and as many Intel 10Gb NICS (please see attached) as possible in a number of UCS C210 M2 servers.I have read the specs on the C210M2..but have to confess confusion regarding the number an...
Hi,I have two problems both I think regarding SSL/TLS somehow.I have come as far a creating the Trust Points for the respective CAs signing the certificates in question.1) I want to configure LDAP with SSL connecting to our ADStill, choosing SSL in ...
Hi,In UCS B200-M2 blades, DIMM becoming inoperable/degraded with cause "equipment-inoperable". Server running on that blade goes in to hang/degraded state.When I reset them physically or from command line they are coming back to operable state. But i...
Hi,is there information about what the various pre-defined settings can be used for & when to set them? The options are:Linux, Vmware, VmwarePassThru,Windowsi have google'd for it, but cannot find any discussions around what the benefits are (if any)...
Hi,I just wanted to be sure that im doing the upgrade properly.We are on version 1.4(1j) and want to upgrade to 1.4(1m). The release notes refer to these upgrade guides http://www.cisco.com/en/US/products/ps10281/prod_installation_guides_list.html.Ho...
