Hi All, We have a FEX 2348TQ-E with 6 QSFP uplinks but, our parent switch a Nexus C7009 only has a single 1/10Gbps N7K-F348XP-25 module. Can the FEX 2348TQ-E on the uplink QSFP ports be connected to its parent switch at 10Gbps instead of 40Gbps? Than...

Hi All, I'm using CML version 2.2.3+build63 and I have lab with 16 routers and switches. I have this setup as it represents my production WAN. I test out new configs and possible work changes however, I have to go back and undo the config changes or ...

Hi All, Quick question on validating my interconnect between my legacy Nexus 7010 and new Catalyst 9600's. We have a pair of new 9600 (not in a VSS) that we are routing to our Layer 3 access layer however, we have a pair of legacy 7k's and a legacy 6...

Hi All, I have a Cisco WLC 5520 with AVC and P2P enabled to block certain applications. My issues are a wireless client can't ping or remote desktop to another client in the same WLAN which is in the same subnet.  I suspect that the AVC or access lis...

Hellos All, Need some OSPF advice...I inherited a transitioning network...originally per my attached drawing we had Site A (area 0 which is is our datacenter) and Site B Area 1. We acquired a second site that we are brining into our datacenter and it...