Hello,
When setting the status to Do Not Disturb on Jabber for iPhone, calls are not ringing on this device and that's what we're expecting.
With the same setting on Jabber for iPad, calls still ringing despite DND Option is set to Call Reject an...
Hi,On my new installation of Unity Connection 9.1.2 and CUCM 9.1.2 using SIP integration, I've followed the configuration we've on our release 8.6 running infrastructure, but I can't reach the user's personal greetings.Using either CTI RP "TranferToV...
Is it possible / recommended to delete old firmware files located on the CUCM TFTP servers ?For example I've all the 8941_8945 firmwares including engineering special ones, not used anymore.TFTP.tar files are 2.3 Go in size, with 3 TFTP and 14 retent...
Hi,It's possible to create a Location with Ad hoc as Conference type only but it's then impossible to find this created Location into the Conference bridge pools and then associate it.I need to select Both to see the Location appear in the choice of ...
Hi,When I do an Ad Hoc conference with 3 IP Phones 8945 (VGA 30 fps) at 384 kbps I see the following :Active, 3 endpoints , 3 screens Does it means I'm using 3 screen license for this low quality (384 kbps, audio included) conference ?In the s...
Jabber is a nightmare...Migrating to jabber 14.0 because of a bug where voice quality is degraded if there is BiB recording activated, then facing another bug on custom tab which was working well so far.I don't have any arguments to prevent migration...
Hello,
I have this issue too on some 8845 with fw 65.12-0-1SR1-1 whatever the recording solution is.
CUCM does not send any SIP Invite to the recorder, so the issue is on the CUCM/IP Phone side.
CTI detects the phone activity.
I've checked with Wir...
HiGrab traces from your Right Fax server. I suppose it's a SIP integration ?Check if the Region codec used between CUCM and your SIP Fax is set to use G711 codec and not a compressed codec.
Hi,Try the followingExpressway C, under Configuration -> Unified Communications -> IM and Presence serversSelect your IM&P server and click on Refresh Server.If you have done some changes, services restart or even nothing it could be the solution. JC