About mangesh084

mangesh084 · ‎10-08-2018

Hello Folks, Can we monitor E1/T1 PRI interface in Prime infrastructure.? Prime Infra ver is 3.3 And Voice Gateway is Cisco 4321. Thank you.

mangesh084 · ‎08-27-2018

Hello Experts, I have Prime Infra 3.0 and want to monitor Windows servers in it. Do we need to upload MIB and OID in Prime infra or these are by default there in Prime infra database. and also from where i can download the MIB and OID for windows server. and how to identify which MIB and OID for which feature. Thanks in advance

mangesh084 · ‎04-04-2018

Hi Vaijanath Thanks for your response. Can I use both at the same time on Same VG350. like MGCP for E1/T1 and SCCP for FXS or Analog phones? Thank you Mangesh Karne

mangesh084 · ‎04-04-2018

mangesh084 · ‎04-04-2018

Hello Expert, I have some Queries related to VG 350 and E1/T1 card. I have 1MFT E1/T1 card on VG 350 and also have one CUCM. Will E1/T1 card work if I add VG350 in CUCM using SCCP Protocol? Thank you Mangesh Karne,

mangesh084 · ‎03-15-2018

Hello Guys, We found the root cause of this issue. We observed that CPU utilization of Access layer switches was more than 97% which was causing disconnection between CUCM and IP phone. Regards, Mangesh

mangesh084 · ‎03-07-2018

Hi Nipun, I have collected packet capture of Phone and I found some logs as follows. <Enum name="ReasonForOutOfService">10</Enum> & <Enum name="ReasonForOutOfService">23</Enum> code 10 ==The TCP connection to the Cisco Unified Communication Manager experienced a timeout error Code 23 ==The device closed the TCP connection due to a restart command from the Cisco Unified CM But can you tell me possibilities of why CUCM experienced a timeout error? Regards, Mangesh

mangesh084 · ‎03-07-2018

Thanks Nipun, But I don't see any errors on switchports and also desktops are connected to PC ports of IP Phones are working fine. Most of the time IP phones works but users are facing this problem 4 5 times in day.

mangesh084 · ‎03-07-2018

Hello Experts, I am facing one issue. We have CUCM servers and IP Phones in same LAN but stills Cisco IP Phones gets unregistered for 30 to 45 seconds when phone in idle mode. And in ongoing calls, phone goes in preservation mode. This is happening with any random IP Phone. CUCM Ver is 10.5. Can someone help out here? Thanks in advance.

Date Registered	‎04-08-2015 08:46 PM
Date Last Visited	‎10-12-2018 12:22 AM
Total Messages Posted	18

Monitor E1/T1 PRI in Prime Infrastructu...

Re: Seems you mentioned Prime

Re: Cisco VG350 144 FxS / 2T1 PRI's

Re: Cisco IP Phones goes into Preservat...

Re: Cisco VG350 144 FxS / 2T1 PRI's

Re: Cisco IP Phones goes into Preservat...

Re: Cisco IP Phones goes into Preservat...

Re: Cisco IP Phones goes into Preservat...

Cisco IP Phones goes into Preservation ...