Is it possible to configure the line buttons on the right side of the LCD screen as BLF keys? On the phone's web GUI it only lists the first 5 buttons. The phone is model CP-8861-3pcc-k9=
Hi there, first post here.
I have a 5 cisco phone IP system with a cloud server hosted by Keyyo.
I'd like to program my handsets (SPA504g) to be able to do 1 button paging plus make intercom calls to the other handsets.
Keyyo tells me flat out...
Hi Folks,
I have a client with a UC540 deployed. The partner is retiring after this coming tax season and isn't interested in a buying a new phone system. We had a power outage a few weeks ago and since then voicemail does not work for anyone. N...
Hello,
MeetMe configuration is not wokring, it comes up as unknown number or cannot complete conference.
Can someone please look at the config and advise
All the config is done by command line
I currently have a client with a UC520 that is having an issue with the shared lines on there phones. The Main BTN points to shared line Ex 2075, that hunts to shared line Ex 2076 and the to shared line Ex 7000. the Ex 2077 hunts to VoiceMail. There ...
I recently used the cloud upgrader to migrate from firmware 2.1.1. to 2.2.2 and now it is asking for a cloud modifier code when I try to login. Does anyone know how I can get that code and what it is? I listed the website below to help. http://firm...
I am looking for the commands to enable the back light on Cisco 7975 phone 7 days a week from 7:30 am to 10:00pm. I am able to get it to work 6 days a week except Sunday with telephony-service command phone service daysBacklightNotActive 1 but if I...
Hello Community,
Our business currently has an SX20 installed in on of our video conference rooms but we are looking to make our setup just a bit more convenient. What we want to be able to do is remotely power on the TV and projector in the room thr...
Hi Support, I am facing a problem with cisco IP phone 6945 reboot randomly. It happens with all phone at a same time.normally it happens 2-3 times a day. Please let me know how i can capture the Wire-shark .Phone connected to SG-300-28P switch. Than...
Hi,
I need to install CME , My question is, Does the firmware file come on the CME or they need to be downloaded?
I have searched the .sbn files, but it does not exist on the falsh:
I tried to download them on :
https://software.cisco.com/download/...
Hello,
I am in possession of four cisco ip camera, s what I want to work as a security camera, but they appear not licensed to activate more.the camera's are as good as new and I want to use it just as a network camera surveillance.what software or l...
i have customer have uc 540 and he ask us to find economy solution for recording all calls so what we have choices media sense for example support uc540 or not and what is average of cost
I added a user to my uc560 through the CCA and assign them to a a phone using the mac of the phone. however it hasnt registered to that phone it goes straight to voice mail. can someone tell me what im doing wrong??
I have a NEC IP PBX SV8100 connected to the access port of the C2960S switch and have configured the port as follows; the voice VLAN is VLAN 500
interface GigabitEthernet1/0/1 description "NEC UNIVERGE SV8100" switchport access vlan 500 switchport mo...
Hello
For several days one of my clients a fictitious UC320W receives calls on one of its groups of several telephone.
The calls come from UC320W in itself:To: 60041225085371 <sip: 60041225085371@5.1XX.XXX.19>; tag = 31d126aba94e2f6i9; ref = 122
From...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: