Hi Guys, Does anyone know if group paging works over the WAN? I've been able to get it working on the LAN but not over the WAN using multicast routing. The closest layer 3 device does not see the phone that is sending as a multicast source. Thanks, ...
Hello all, I'm a new entry level tech for a small voip provider. We have a bunch Cisco SPA509 phones out in the field and I've been tasked with progamming some soft keys that use * codes. Right now I'm starting at very beginning (level 0). I can l...
Is there a uc540 compatibility with issue with 9971? I cant create hunt groups with my 9971s.
It seems like the frequency that the phone sends registration packets is based on what the expiration value is set to.<Register_Expires_1_ group="Ext_1/Proxy_and_Registration">300</Register_Expires_1_>The phone will send a register packet to the SBC ...
We have a multisite environment. Site A and Site B. The majority of the time, when a user at Site B dials 6 + extension, the call gets routed to voicemail. When Site A does the same, it never works. When it doesn't work they hear a voice telling them...
We have installed a UC540 for a customer - Insurnace Agent. The customer is using an application called eAgent. The customer would like to integrate eAgent with UC540/SPA504G telephones. The objective is that when someone calls then the eAgent Appl...
Hello Support Community!I have a UCS 540 and wnat to connect analog phones via SPA112 ATA. Unfortunately this combination is not officially supported, but several posts indicated that it is possible.If anyone has an idea or a solution that would be g...
I'm trying to create more inbound calling routes but the "Create inbound calling route" button is grayed out. How can I fix this?
Existing 7965 that is working fine. I need to customize the second button on the device, in my case I'm adding a line but any customization fails. After clicking apply config in CUCM the device reboots but the new line does not appear. Have perfor...
Hi all,I am trying to forward a range of ports (55736-55863 for Synology Surveillance Station) from the WAN interface to an internal IP on a Cisco UC540. I'm not great with the CLI so I generally stick to CCA but right now I'm not even sure it's po...
Hello,Does anybody know (if possible) how to setup a UC560 so that users can make changes to their phones by accessing a URL from their webpage? I thought it was just a case of browsing to the phones IP address and logging in with the username and pa...
Hello,We have a new installation of Cisco Unity Connection (BE6000) 9.1 which has been setup for user mailboxes. The End Users have asked us to disable the "confirm on delete" which happens when trying to delete a voicemail via the TUI (Telephone Use...
This is one that has me completely stumped. We have 5 sites total all running either uc520's or 540's. All sites can dial each other over the MPLS with NO issues. The issue is when site 1 calls site 5 and the call goes to voicemail after 4 rings t...
I want to be able to dial other offices, we all have uc300's ( approx 8 of uc300's) The only links we have between us is Internet. Am I right to assume that all I need to do is create site to site VPNs and calls can be routed via dial-peers on the uc...
I don't believe this is possible but my searches have not come up with a definitive answer. Can the SPA-303 be used as a regular analog phone?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: