When installing 303's we have some that will not pick up an ip address and stay at initilizing network. The computer plugged in through time will connect to the internet. Rebooting and re-plugging in cables does not seem to fix it. Other spa 303's...
Greetings, Can someone her please share their knowledge and experience and guide me regarding which VOIP solution would be appropriate for below scenario A hotel infrastructure with below requirements: SIP Ext.: 300 by default ( max. 500) Concurrent ...
Dear Friends!I have cisco SPA502G at office. Suddenly it lost network.I reset it comparing to the settings of other phone but there is no tone and it give error in Ext 1: Faild (403).Is subscriber info has something to do with this? Please guide me i...
Question: Has the SPA112 VOIP been problematic on LANs in Australia with cellphones using Telstra VoWifi? (Voice calls over Wifi) Background:I'm in Western Australia. ISP = Aussie broadband ('ABB'), an excellent ISP. I use Fixed Wireless broadband an...
I'm trying to configure my UC540 to work over SIP. I have outbound calls working fine. Inbound calls disconnect right away. Here is the output from debug ccsip calls. 002691: Sep 8 07:14:34.760: //-1/25167B2F80FE/SIP/Call/sipSPICallInfo:The Call S...
Hello guys again me!!I figured out with my personal conf the phone.Now i've last 2 question about the conf to make it max useful;)1 question, to male conference call, able to use softkey to make the new call but when try to mix the 2 calls in a confe...
My VoIP provider stated that they allow a blind transfer of a call via the SPA112 but that they don't provide the needed Dial Plan configuration to perform the transfer. Anyone know how to set this up? Here is the default: (*xx|[3469]11|0|00|[2-9]xxx...
hello finally my phone's working well with the correct time and setted linekey for speed dial cuz i've just one line.Now the question is...How to set up softkey rules?HOw to apply them in connected line, off hook and hook?Are there some template or o...
Hi now that i solve my bug and with a simple sep file got my phone in the network and registered wanna solve problem for time.Someone knows of with this version clock problem was solved?And more need 2 option, one to add hiostory calls(recived,missed...
Hi all, i'm new in voip and cisco world. my friend present me a cp8961 and i want to configure it to work with my fritzobx 7590, but no way to solve it. I try to download tftp32 for dhcp and tftp server..but for sure i mistake something. I download t...
Hi all. I opened before a 3d, after some session i was able to register the phone in fritzobx network.But was impossibile to call, just to receive. From that moment...no more chance to register. I don't find the right sepxxx.cng used and so i'm just ...
SPA122 ATA, I tried upgrade firmware from SR1 to SR3 release. Followed standard procedure, from ATA Configuration Utility choose Administration > Firmware Upgrade, chose the firmware file, push 'Upgrade' to begin the firmware upgrade. Firmware upgrad...
Hi, I can see my license below in my smart account. Should I see seperate device unit licenses or is below license includes the device unit licenses? So can I install this license to my ccm server?BE6000 Starter Bundle UCL 35 (12.X)Thanks.
Hello, I am a user of a Cisco SPA502G IP Phone. It is in "SOS Phone In Recovery Mode". Could I recover the phone to "spa50x-30x-7-5-2.bin" version?I try it with the 66712-spa50x-7-4-4-recovery.zip version of recovery, but no works. ThanksChucklee
The configurations restore is not working for me.SPA112.2 FXS Firmware 1.4.1 Hardware 1.1.0I get: Restore has failed. SPA112 is restarting...You will be returned to the Login page in a few minutes. Only two steps, Click backup (which works) then try...
