Voice Systems and Accessories - Small Business

Hi can anyone please guide if the UCC Client operates under a terminal server, now known as MS remote desktop services server on Windows 2008 R2 server or not.What we think it will not work due to the terminal server having a single IP address and th...

Hi, I want to do with xml and directory corporative, and I have a mysql database, and I wolud like to the phone with xml connet to mysql and show me the contacts.It's possible??I have been using Cisco 500 seriesThanks.

Greetings!  My UC560 has several loopback entries, I assume it's CCA's bipolar disorder. Here's an example:interface Loopback1ip address 50.50.50.50 255.255.255.0ip nat insideip virtual-reassembly in!interface Loopback2ip address 51.51.51.51 255.255....

Based on the document http://www.cisco.com/en/US/docs/ios/voice/cdr/developer/guide/cdrcsv.html#wp1172378 which describes CDR format for UC500, field #31, "voice-txt-duration" is the duration, in ms, of a call.On my UC540, running 8.2.0, all of the C...

This may be completely off-base, but I was wondering if anyone had experienced conflicts with multicast being disabled in the small office environment using Cisco phones. To clarify- I have a number of users on 504G's and the network is otherwise opt...

I have a new UC540 with SPA509G phones, all on the latest firmware and configured with CCA 3.1.1. The issue: When connected on a call, the Transfer softkey is missing, so they cannot make transfers.  Troubleshooting so far: I see it in the default te...

Folks-This community has been most helpful with this door entry system we are doing for this customer.  We have one last hurdle:Right now we have the door entry system programmed as one of the buttons on the 7962 phone. If they need to open the door ...

Can I use SPA Phones (or generic SIP Phones)  with Cisco Unity Express mailboxes, though in a very basic way?Thank you very much!

UC540, latest firmware.Outside call from 202-555-1212, answered by extension 200 and forwarded to extension 201. Outside caller leaves a voice mail message which is then forwarded to x201's e-mail.The email sent from UC540 reads "voicemail message fr...

How do you change the Auto Attendant default password for the UC320 from 12345?