Voice Systems and Accessories - Small Business

Hi all.I've 2 SPA504G connected to an Asterisk box (Elastix).What i'm intresting to is the way for Provision the config information.I read all the User Guide that i found in the web (Cisco pubblication) and many forum, but i not can understand all in...

I was wondering if it's possible to connect the WCV210 internet camera to the SPA525G?Right now I stucked with following problem: Every other url as rtsp://xxx.xxx.xxx.xxx/img/jpgvideo.sav results in an url error.The camera only delivers the streams ...

Hi all,i try to show in the phone display one SoftKey function, but this is impossible for me.The function that i desire is "gpickup".I see in the phone configuration that there is all the "Programmable Softkeys" field in the "Phone" tab.I change the...

Hello,I am trying to configure a trunk sip for SP9000.The question is: how works the spa9000,  like SIP Trunk or like SIP line (B2BUA)?My ISP, give me only the ip sip server. They don not use other parameter like username or password. How can I confi...

I have a customer with a UC540 and 7931 phones, and they recently mentioned that they are getting delayed voicemails. They seem to be getting their voicemails hours or sometimes a day or two after they are left.When looking into the newest support pa...

I'm having an issue where calls to one extension will not trasfer to voicemail if the user is on the line or DND is enabled.User can login to the mailbox and save greetings, but callers cannot leave messages.All other phones/extensions/VM/AA works fi...

Hi,I'm using a UC560 and 20 508G phones. My users are getting complaints from outside callers that their extensions are busy. Callers have no problem reaching the auto attendent, but when they dial a user's extension, they get a normal busy signal. W...

Hello,The music on hold on our side doesn't work anymore. It  worked before, there was no configuration change. We tried different  mp3-players on the voice port 0/4/0 (moh). We also checked some  configurations on other customers sides where the moh...

The power just went out and I can't seem to connect/get CUE to start working.After the power outage, the UC520 restarted and phones came back on as normal.  We can dial out, but can't access voicemail or AA. The message in CCA that keeps coming up is...

Hi All,I got my Linksys WRP400 last week, our WAN connection is PPPoE I have two laptops connected with router by wireless and enabled one voip port everything working fine for me i have internet on my laptops and i can make international calls. the ...

hi guys,what is the most compatible firmware with uc560?i did system upgrade to 8.0.2 through cca, but 7975 keeps saying auth fail during the upgrade...any idea?thank you

Hello,I have had my first UC500 Project finished. All is working fine. Only incoming calls from the same City will be displayed with the Costumers number.Will say a call comes in like 6912341234 it will be shown as 0695675670 (wich is the destination...

Hi everyoneI have installed localization packet for Portuguese (Brazil) and all ip phones are working fine(This is the packet installed CME-locale-pt_BR-Portuguese-7.0.1.1.tar)However IP Phones 521G and 524G after the installation still showing the...

Call to DID at a no answer state, voicemail answers " There is no mailbox associated with this extension. "uc500-advipservicesk9-mz.124-11.XW6.binUC520 with 12.4I have the DID in the primary E.164 number, deleted and re-created, restarted...  Users c...