VPN

Hi For some strange reason, I'm unable to connect to my vpnclient on my machine. I'm able to connect from someone else's machine using my user IDI'm getting an error " Secure VPN Connection terminated locally by the Client. Reason 413: User authentic...

Hi everyone,Here is my scenario.INTERNET           <------->                                            ASA5520 <----> INTERNAL (with DHCP Server)VPN (USER / StS) <-------> I´m "playing" with an ASA 5520. I´ve successfully configure the ASA to use th...

AnyConnect API.Often  new VpnApiClass() throws "Retrieving the COM class factory for component with CLSID {C15C0F4F-DDFB-4591-AD53-C9A71C9C15C0} failed due to the following error: 800701e7.".vpnui.exe is not running.Application restart does not help....

Hello,is there any way to configure IPsec VPN tunnel using the local address pool?It's Cisco 2800 and the problem is I have set up site-to-site VPN connecting local network 10.48.0.0/16 with three remote networks 10.5.0.0, 10.2.0.0, 10.1.0.0 and I ne...

Hello,I am trying to setup Anyconnect VPN on ASA 5510. Unfortunately, it needs to be behind a Meraki device. I was hoping to assign public IPs for vpn purposes to meraki and other one on outside interface of ASA and route the vpn traffic through mera...

Hello,we have a new group of VPN users, the should connect to a nother IP Adresse.How can i configure a 2. IP on our ASA 5510? or NAT the new WAN IP to our old WAN IP? interface Ethernet0/0 nameif outside security-level 0 ip address 1.1.1.1 255.255.2...

I have a cisco 881 ISR Router with a site-to-site IPsec vpn tunnel to a mikrotik device on the other end (I inherited this from my client). The tunnel is constructed properly and is up, however traffic does not pass or get routed to the FA4 interface...

I have configured Cisco Client VPN on Cisco ASA 5505 with Split -VPN and everything was working fine with any issue. After that I was trying to configure AnyConnect VPN with creating self Certificate like below. corpasa(config)#crypto key generate rs...

I am trying to download the Cisco AnyConnect VPN Client from Cisco 2821 using 15 Code. I have configured using the following configuration. ip local pool webvpn-pool 192.168.15.80 192.168.15.90 webvpn gateway Cisco-WebVPN-Gateway ip address X.X.X.X p...

Hi:- i am facing VPN poor performs  issue. My VPN tunnel is up but found some errors in the out-put of #crypto ipsec sa x.x.x.x. Is "crypto ipsec df-bit clear" command will resolve the issue, or its something different error.  Thanks for your help.  ...

Hello!I configured an IPSec Tunnel between CISCO 1921 with IOS 15.3 (with securityk9 and ZBF) and MikroTik RouterOS (5.26) - both fiexd IP Adresses - but the tunnel does not come up : (On the CISCO Router are running tunnels with crypto map - it work...