Hello.Please see below (obfuscated) printout from security monitoring software...Duplicate TCP SYN from Inside:10.2.1.99/47266 to Inside:10.2.200.46/445 with different initial sequence numberDuplicate TCP SYN from Inside:10.2.1.99/15256 to Inside:10....
Hi Does anyone know if and how a password can be hidden in the ASA backup configuration file. Password is mask doing "show running-config on the box itself"We are using Firewpower Appliance an the ASDM on it.Best regardsIglu
I am creating the post to help others solve a problem that we encountered on the subject. We had a working SAML configuration using Azure as the IDP. There is a large mixture of documentation on the subject. A few guides I found useful are as follows...
Good afternoon colleagues.Please advise, I have a virtual FMC and FTD in production, cisco anyconnect is configured inside in the basic configuration, with no additional features. Then all this is published to the Internet via a domain name where onl...
Hi there,I'm trying unsuccessfully to setup multicast service reflection on a cisco virtual router, but this may be down to by lack of knowledge on how to configure the cisco or my test rig.This is complicated because i'm using a cisco virtual router...
Hi, I'm having an issue with a Mac OSX machine connecting to a VPN when using dynamic split include tunnelling. As soon as the custom attribute is applied to the group-policy, the client just cycles through 're-connecting'. Has anyone seen this behav...
Hi all,I have set up the AnyConnect VPN in FMC and allowed all traffic over the tunnel.I can access any internal network but the VPN client get not connect to Google.com or Cisco.com etc.When I try to nslookup, the VPN can resolve the IP address But ...
Hi Team,We have 2 ISP with our Firepower and we are looking into redundancy for our AnyConnect VPN and we found the Backup Server.Our request:We just want AnyConnect to automatically reconnect to the Backup Server in the list when a remote anyconnect...
hey There !!i Am using three cisco routers ISR 4331, 1 central router and 2 branch routers, each branch router is connected on a serial interface with the central router my goal is to enable IPSecs between the branch routers and the central router, s...
Hello, I am trying to change AnyConnect Client GUI Text and Messages. I tried changing from Configuration > Remote Access VPN > Network (Client) Access > AnyConnect Customization/Localization > GUI Text and Message and also from language localisation...
Hi All,I have multiple customers connecting via ipsec tunnel on IKEv1 and I would like to upgrade one customer to IKEv2 without interrupting the rest. Is it possible to run both version on the same router? Do I use the same crypto map applied on the ...
Hi All I have cisco 3941 Router and running multiple site to site IPsec VPNs and they are running IKEv1 and now I want to configure IKEv2 for one customer before doing the configuration I want to know if it has an impact on the previous site to site ...
Hello all For remote support possibility by a service provider we need to have a Site to Site IPSec Tunnel to them, as this is the only VPN type they offer. This tunnel is working so far.Now the problem:Because i can't change the network configuratio...
Hi, I want to make first time a VPN to learn how to do it. I have main router wich have on one interface ip address 10.0.1.1 and 10.0.2.1 on the next one. That interfaces are connected to two other routers one with 10.0.1.10 and other with 10.0.2.10 ...
Hi, this issue is only on MacOs with any version, when I disconnect the vpn connection and for any reason I need to re-connect, I can't , because I have the domain name resolution issue, as you can see in the screeenshot attached on this post.I have ...
