We have ASA 5540. After setting up one-to-one nat, do I need to do anything else?static (Inside,Outside) public ip address private ip address netmask 255.255.255.255Thanks.Diane
Hi All,I was running 5.0 version of VPN client in windows 7, when double click on the VPN client, it was running but wasn't shown up on the desktop and only shown in task bar. I've upgrade to latest VPN client for 64 bits, same issue.any suggestion w...
*xpost from voip forum*Having trouble using CUPC 7 through new ASA on SSL VPN (Anyconnect 2.5). Firewall rules have been opened to allow traffic, and am able to sign in, however unable to use softphone, or set status to available. Routing and FW...
I have inserted a certificate check in the secure desktop prelogin policy. When using AnyConnect client version 2.5.2019, both Windows 7 and Windows XP computers fail to connect. The following pop up message is displayed...Posture Assessment Failed:...
Hi,First let me explain I do not usually deal with Cisco devices anymore and have never touched one of the ASA devices before so any help you give me would not only be greatlt appreciated but will need to be in baby steps.Okay now to my problem, we h...
I have a single Windows 7 pc that cannot access the Internet when connected to our networks through the Cisco VPN client 5.0.07.029-k2. The computer can access any computer on the remote network using the IP address, but it cannot resolve any names t...
Hello All,I want account the number are users connected to network via VPN also who are they and what they are doing. I have configured local database(on router) for VPN users.How to do the same.Please provide any link or document to do the same.Abhi...
we have a remote office that has dsl in their office. we purchased a new Cisco 867 router with an ADSL connection to setup a vpn tunnel to our cisco 3030. Dose anyone have a working configuration for this setup?The 867 is a the lasted ver of 15.1. ...
Can anyone point me to a guide on configuring 802.1X authentication using the AnyConnect 3.0 NAM module. I have the information required to configure the NAM module but need pointing to a guide on how to set this up on Cisco Secure ACS server side an...
I have read all the posts I could find, every bit of documentation I could find and still can not get my head around how I have to configure this new ASA to meet the requirements. My customer is bringing up a new Data Center and going to be migratin...
I need to connect a partner site via IPSec Site to Site. I don't have any control over the other site, and have concerns about their security configurations (old O/S, limited, if any antivirus or patching, etc.). They have no server or internal DNS...
in a spoke to spoke dmvpn, why is it that the crypto session can only be initiated by the spokes? Is it that IKE authentication can only be initiated from the spoke? Why not the hub? they are both using wild card preshared keys.I can understand in an...
por que al ingresar por WBVPN me sale el siguiente errorlevanto mi navegador e ingreso HPPTS://X.X.X.X:2443Existe un problema con el certificado de seguridad de este sitio web. El certificado de seguridad de este sitio web no fue emitido por una enti...
Hi ,One of my customers wants to set up a IPSec tunnel back to a Cisco Gateway outside the US, due to govt regulations they want an encryption less than 56bits. I wanted to ask if any body knows a Cisco router that supports 40bit Encryption?ThanksRa...
Hi, I have one ASA 5510 on main office that access the internet trought of a private link and one ASA5505 on the branch office that access the internet trought of a ADSL link with dynamic IP.Behind ASA 5510 the network is 10.8.40.0/24 and behind the ...
