VPN

We have a Site-to-Site VPN between our two offices.  There are domain controllers at each end and they replicate almost instantly.  We can also quickly access server resources via RDP.  The problem that we are experiencing is that when it comes to fi...

Hello,Any idea why in some places I can not switch on my VPN ?The strange thing is when I use the VPN server of my office , this work OK and it is the same VPN client.So this means that I do something wrong in my private CISCO 1841 ROUTER.Here bellow...

HiI have a customer requirement to provide multicast across an MPLS network, the MPLS provider does not support Multicast on the PE hence I need a solution that provides multicast but is implemented on the CE routers only. Looking at GETVPN examples ...

Hi I'm hoping someone out there could offer some input into this for me.I've been tearing my hair out over this issue and can't seem to find any information on how to rectify it. When I try to add an AnyConnect Clent Profile via the ASDM (Configurati...

what is the IOS version needed to run anyconnect on a 877 router?Thanks,

I have a windows server 2003 IPSec server I've been managing for a few years.  Recently I've replaced our firewall with an RV220W.  I've copied all of the settings identically from our previous firewall (firewall rules for PPTP, IKE, NAT-T).  Now, th...

I have configured site 2 site vpn on asa5510 and a customer end sonicwall FW.in my cisco asa5510where one end of vpn   i start pinging the remote machineon the list of crypto acl  got the error on the syslog:construct_ipsec_delete(): No SPI to identi...

Hi all;I have 2units of ASA5510 with 3DES-AES license. One is to be deployed in HQ another unit at remote site.I have been using the asdm VPN IPSec wizard to perform the configuration. I would like to know the recommended

Hi,Using webvpn on a 2811 w/ adv ent 12.4(20)THTTP sites work fine (in the url-list)But when we try to use an HTTPS site, clicking on that site just hangs forever.  Debugs show the connection is making it, and the servers are getting the connections....

Hi,I've been tasked with cleaning up some old client configurations. This site is a spoke with one site-to-site vpn tunnel back to the hub. I'm trying to figure out if the dhcpd auto_config outside is being used to provide dns resolution from the hub...

Hi all,I have this situation, I need to establsih an IPsec communication to another site but I need to identify all my packets sent, as a different networks as my local one. for example: my local network is 10.5.0.0/24 and I need to sent packets as 1...

The bellow config is set up on my router, running 12.4. When the client initiates a connection the error states preshared authentication does not match the policy, which to me is clearly false. Any ideas?Config:aaa authentication login userauthen loc...