I managed to find some old documentation that lists the tested thoughput of several routers running DMVPN. Does anybody know how the ISR series of routers compare (ie the 2811 with the encryption card managed 3.6 kpps, how would the 2911 compare?Doe...
I have two PIX 501's. I've had Cisco VPN Clients successfully connecting to PIX #1, and their connections work just fine, and I have now established a VPN from PIX #2 to the first one, but I can't pass any traffic. I've attached the configs from bo...
DEAR EXPERTS, WHEN I TRY TO CONNECT USING VPN CLIENT, IM UNABLE TO CONNECT AND ERRORS 412 AND 414 ARE APPEARING ON THE CLIENT END.CAN YOU PLEASE SUGGEST ME A RESOLUTION FOR THIS HERE IM ATTACHING THE CONFIGURATION FILE.THANKS AND REGARDS
I have a site to site VPN with a static IP address and a dynamic IP on the side of the static ip I have a ASA 5510 and the side of a router I have dynamic ip 850, according to configure the VPN as I said in ciscotacc.com page k23411061 case. Using L2...
Have a client that up unitl a few months ago had a Pix 501 in place. They replaced the Pix with a SA520 firewall device and have been experiencing problems connecting to the VPN with their Verizon wireless air cards. I found out today that this is ...
Hello, I have configured VPN access on a 2800 router but it does not respond when I try to connect to it using a cisco client. I can access the router through SSH so the router is working. Can anyone tell me what I have missed?Anthony
Hello,I need a config example on how to setup VPN on a 2800 router using local usernames database and pre-shared key or whatever is the simplest.Nothing special needed here.All the examples are for special features like Radius authen.I just want to u...
Hi,I would like to configure the ASA for vpn only. By default ASA allows traffic from high security interface to low security interface. I want to stop this. Is there a way of doing this without resorting to access lists.thanksJohn
Hi,I am using ASA5540 and configured the IPSEC VPN, my client use routers that each open L2TP IPSEC VPN to my ASA5540.Per username and password I allocate static IP addresses from my Radius Server.I can see both client routers have established VPN on...
We have an ASA 5510, with SSL VPN setup. We have users logon to the ASA/SSL VPN, and then use the Citrix ICA Java Applet to allow users to access Citrix Published Apps. This works well 90% of the time. However, there are times when users will logon, ...
have an ISDN network as the following:In main office PRI link.In the branches BRI links.see the attached.I want only the main office which make the calls not the opposite.I want the cost will be on the main officeI increased the idel-timeout and del...
Can you use EasyVPN Server on a ASA 5510.I am looking at the ASDM and cannot see any options to set this up as an EasyVPN Server! Is it just command interface level or just a particluar level of ASDM I need?
Hi, I would like to get a pair of Cisco 5520 that needs to be as active/passive and I am a bit confused abt. the licensing for both the boxes. I need to check the licensing for 25users and 50 users. From what I have gathered, it should b...
I am looking for a best practice in setting these up to talk to each other. Our 535 core firewall just now is configured for IPSEC VPN's and has been working perfectly for the past 2 years. It is running 7.2 (3) and is managed using CSM although I ...
