VPN

Hi All, I have a strange problem with ssl vpn in IOS, I can bring up the ssl vpn web page from one pc and login, but from another pc, when I try to connect to web page, browser can't find the web page. both PCs are using IE version 7.0. any suggestio...

We are performing a large number of site migrations by moving over onto DMVPN.Most sites are successful without any issues but 1or2 are displaying the following issue after PPP:router debug crypto ipsec error: ISAKMP:(0:214:SW:1):deleting SA reason "...

Hi,My ASA version is 8.0.4, and I have setup "Keep Installer on Client System" to "no" in my SSL VPN Client group policy, but the AnyConnect VPN client can not uninstall automatically after I logout from Clientless SSLVPN portal and / or disconnect A...

Hi All, One of my cleint has Ethernet handoff for interent with /26 public space (using .1 for the ISP core) assigned from ISP. Client has -->Activ/Stdby ASAs on edge connected to External switch and the ISP handoff also on the same switch and ever...

We have an ASA5520 running 8.0(12) and have ipsec vpn tunnels to soho asa5505's. With the same-security-traffic permit intra-interface command we do hairpinning between the soho vpn sites via the hub asa5520.In addition, we recently added ssl licensi...

Hi Security Guru's,It's my first time to implement this. But before doing that i want to have a clear understanding on what i need and what to do. I have here 2 asa 5505 and will be put into 2 sites. Site A and Site B. We want to run both site to sit...

We are currently migrating our machines from a W2K to a W2k3 Forest.After we migrate a machine, the Cisco VPN Client service cannot start, and fails with error "Failed to Validate C:\Windows\System32\vsinit.dll". (Client version 4.6 and 5.0 are the s...

Good morning folks,I'd like to use the ASA5520 to receive conections from 300 VPN users.What the client need to have in his computer?Where Can I find the documentation to configure the ASA5520 to be the VPN site?Thanks

Hi,we have a asa-asa connection between 2 buildings with ipsec and a gre tunnel between them because we use eigrp for this network.the tunnel is ok works perfect but i get syslog messages like :Aug 13 17:04:54 FWH50031 %ASA-4-313005: No matching conn...

Hi,This is really embarrassing especially because I have been in the routing, switching a and voice field for a long time. I am trying to telnet to a Cisco SOHO 71 router and am experiencing problems that I have never seen before. Basically, the rout...

Hi,Can I upgrade the IOS from 6.3 to 7.2.What will be the impact,Will the existing config will be erased or will not be erased?Can I able to creat the TRUNK between a PIX and Cisco L2 switch?And also I need to configure the PIXs in FO, that is one in...