VPN

HiI am having trouble setting up a ASA 5510 to use PPPoE. The ASA is connected to my D-Link ADSL Modem which is setup in bridged mode. My config is as below.Am I missing something or can somebody tell me how to troubleshoot? The command show ip ad...

Getting some of these in my syslog. Deny IP from 10.122.25.52 to 10.63.30.12, IP options: "0x14"This pix on 10.122.x.x subnet is connected to another via IPsec. OS is 6.3.x. The two endpoints are video conf systems pushing h323 video between via th...

ciscoasa(config)# sh run: Saved:ASA Version 8.0(2)!hostname ciscoasaenable password xxxnames!interface Ethernet0/0 nameif outside security-level 0 ip address ext_ip 255.255.255.240!interface Ethernet0/1 nameif inside security-level 100 ip address 172...

Hello All, I had this working once before, but seems the check mark escaped from it's box and I can't find that box. I have an ASA 5520 running 8.0(3). I have SSL VPN licenses set up and have the SSL VPN working like a charm - except - When user...

Is it possible to configure an AS5350xm to behave as an X25 (XOT) pad? I dont seem to be able to find any info...?

Dear All,I would like to ask you about Pix 515 Version 6.3(4), i would like to do VPN client. i want to know this version has authetecation user password or not?i red the document it don't have authetecation user and password. just have passwor on tu...

Hi,we are using ASA 5505 remote access vpn is configured my clients say their vpn gets diconnects after 1 hr when they are using doing some work not idle what is the wrong in configuration & please find my firewall configuration

I am using a Cisco PIX515e unit running version 7.2. We have a Remote Access VPN which is currently using a Group Password and authenticates against the MS Active Directory.My problem is that I want to change the VPN so that is uses certificates for...

I have a problem with one of our ISDN backup lines. The primary connection to the remote site is a serial interface which we shut down periodically to test the isdn comes up using a floating static route. An engineer has tested the line and reported ...

Topology10.23.26.2---\-------------WAN-asa 552010.23.26.198-/10.23.26.2 has subnet 172.16.16.0/24, asa - 192.168.10.0/2410.23.26.2#ping ip 192.168.10.212 so 172.16.16.1Type escape sequence to abort.Sending 5, 100-byte ICMP Echos to 192.168.10.212, ti...

Hi allHow can I check if the isdn NT (Network terminal) is really attached to mi BRI slot.I use sh isdn status command and layer1 in some Routers is activated but in others is deactivated, but when i check my backup it works fine so the line is attac...

i configured vpn on this 877 router through cisco sdm but i still cannot vpnversion 12.4no service padservice tcp-keepalives-inservice tcp-keepalives-outservice timestamps debug datetime msec localtime show-timezoneservice timestamps log datetime mse...

What is the bandwidth on the VPN tunnels?Where can I find this information.

Hi All,We have a production site with ASA5520 which has L2L tunnel to another site which has been up/stable and working fine. Iam trying to bring up a new site having another ASA5520 with IOS 7.0(7) and tunnel is not initiating at all. The internet a...