VPN

When I do a show access-list XXXX debug, at the end of the return line it show the Hit count. Then you have several other replies. What do they mean and how could you use them to analyze a problem. (hitcnt=0) 0xa22d9772 (id=29496) (cntrIndex=0x18c3c...

HelloI will hava a terminal server somewhere in the internet. Now thin clients should work on the terminal server. To have a secure connection I will user a VPN. There should be a site-to-site and also a remote access VPN.And I have more then 50 clie...

Hi all,I should migrate my remote client vpn from ISA server to the PIX. Can somebody help me?The environment should be migrated using same vpn type (i.e. protocol, clients certificates, etc)Actual environment:Ipsec over l2tp vpn;Clients validated by...

Hi,I have cisco 5520 in my office. Now due to one situation I want to use public ip directly in my inside network.I want to give one public ip address directly to my server.what configuration i need to do to get the server access from both inside and...

could someone please explain how to bridge the same subnet over a VPN? is this even possible?

Hi,can any one answer the above question. Someone told me that PBR can be implemented on ASA version 8.0govind

It appears that the Clientless VPN (SSL) function completely ignores the mtu setting that is applied to the inside and outside interfaces. mtu inside 1300mtu outside 1300I have verified that this is true with ver 7.2(4) and 8.0(3) using packet captur...

I have a 4506 doing my intervlan routing. I have several vlans. That 4506 is connected to a ASA5520. I have a vendor that is trying to VPN into the network. He can get connect via VPN, the ASA gives him an IP from the address pool. He just can't hit ...

I have a problem with easy vpn server vpn server doesn't sent routes i can;t see routes in the vpn clientvpn client connection okproblem is n the RRI can anybody hel meit is my server configcrypto isakmp client configuration group test key cisco123 p...

I have three standalone wireless desktop computers that connect to our VPN concentrator in order to use the internet. All three of these computers timeout after about 5 minutes. I go into the same room with a laptop (i've tried more than 1) and I g...

I have a handful of 871's for SOHO users which started out utilizing an EZVPN tunnel back to an ASA at our headquarters location. That was extremely unstable so it has now been flipped to a static to dynamic mapping in the default L2L tunnel group a...

My set-up looks like this:VPN-client host-->WLAN Subnet-->AccessPt1242AG-->Cisco871 Router-->Internet-->VPN serverI was able to connect to other wireless devices within my WLAN when I am not connectedto the VPN server. Whenever a host w/in WLAN conne...

Hi,Can you use Microsofts default vpn software to access a cisco box. I've configured it using Easy VPN server but no such luck. I have a 2801 router IOS (12.4(3i))

Hi, I'm trying to configure ACLs to restrict the network access for remote access users (L2TP/IPscer VPN). I'm applying an vpn-filter to the group policygroup-policy DfltGrpPolicy attributes wins-server value 192.168.128.19 dns-server value 192.168.1...

Is it possible to tunnel traffic between two IPsec LAN-to-LAN tunnels, or between one IPsec tunnel and one SSLVPN tunnel(AnyConnect client) with the ASA 5520?E.g. We have two IPsec LAN-to-LAN tunnels. Is this setup possible: Tunnel 1. Local subnet: B...