VPN

Hi,I have 2 firewall; one active, one standby.I got a loop from some where, I need to shutdown proxyarp for that interface.but later, I can't ping to the server from inside. ( I have done a nat translte for the server )Q1: why xlate need proxy to wor...

How to disable mail guard feature in PIX515

Hi, Does the cisco 2811 support L2TP over IPSEC?

Hi. I'm having trouble with "Sudden increase of traffic to a port" rule not firing. I think there is an issue with the event itself. I'd like to verify the event ID and groups associated with it. Can someone please provide me with this info? Thanks!C...

following is my configuration of 1812.----------------interface BRI0 no ip address encapsulation frame-relay IETF dialer pool-member 1 isdn switch-type basic-net3 isdn point-to-point-setupinterface Dialer0 ip address xx.xx.xx.xx 255.255.255.252 encap...

Hi,A design question for the following requirement:Company A will provide network management for different SMB customers for their Cisco Callmanager express systems. In Company A there is a Cisco VPN Concentrator; My question is on those remote custo...

Good day guys,I've got a problem.i have to set up a ipsec tunnel with a partner, but the partner wil not use our local subnet, instead he give us the ip address 1.1.1.1 /32I can use the loopback interface, buti can't do the command "crypto map local ...

Can the uplink port to a Cisco VPN 3000 be trunked? I want to create multiple user groups and assign them to different vlans

VPN client left two hours with no traffic. Tunnel collapsed although configured incident time out. SHOW TECH and selected SYSLOG outputs attached.Customer says it is not necessarily 2 hours all the time. So time idle connections can time out in 40 mi...

I have a user who is connecting via VPN to a 2800 series router. One day the VPN client started acting weird. After initializing the software, the VPN window would pop up for 3 seconds (start the initiation process) and then collapse with the bottom ...

By default CSA detects when a new program is being installed and queries the user 'are you trying to install a new application'As you can see, the first event denies rp505enu.exe to invoke its own setup files in a temp directory while the second rule...

is there a vpn client that supports windows vista?

Hi,i'm using IPSec+OSPF. There're the two possible solutions for protocol/transprot using Tunnel Interfaces:a) GRE/IP with crypto-map, orb) IPSEC/IP with crypto ipsec profileWhat are the advantage/disadvantage using a) or b)...?My main connection is ...

Hi guys,i'm new users and simple user cisco :-)I would want to know, as I can setup the router in subject in order to make them to work like Access Concentrator in order to authenticate 1000 users using freeradius? You can give to me of the link wher...