VPN

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Cisco CyberSecurity

Labels

Forum Posts

Hi All,I need to Configure VPN between PIx 506Eand 3005 Concentratorbut the pix end doesn't have a public IPthe tunnel is terminated at the DSL modem end So i need Configure Pix like a VPn client ."If I configured it in base group does it affect my e...

gopikrish by Level 1
  • 582 Views
  • 2 replies
  • 0 Helpful votes

Hi All;would you please show me how to configure easy VPN server on router side which is running SDM and VPN client software on the laptop on the other side very briefly?thanks

Hej. Sorry if this is the place but hope someone here can help me out.Currently i have a problem with routing traffic from one network to another through a VPN. The setup is as follows:we have 2 internal network(DMZ & Internal) and 1 outside interfac...

Hello everyone, I'm faced with a configuration issue on an existing AS5300 server------[IOS (tm) 5300 Software (C5300-JS-M), Version 12.3(15)]24 Serial network interface(s)60 terminal line(s)4 Channelized T1/PRI port(s)30 DSP(s), 30 Voice resource(s)...

Resolved! PPPoE Server

I have configured 3640 router to perform as PPPoE server in order to terminate the PPPoE sessions and forward it to a RADIUS server, I?ve included the router configuration below but this configuration isn?t working, your help is highly appreciated?vp...

mahadhema by Level 1
  • 932 Views
  • 3 replies
  • 0 Helpful votes

We currently have a VPN 3015 Concentrator, but we are going to be installing an ASA5520 to replace both it and our PIX. Right now I'm trying to figure out how to configure things that I'm used to on the 3015 on the ASA. The one thing that I haven't...

I use certificates served from a Microsoft certificate server for authentication of VPN and WPA clients.Despite the certificate authority being valid for 5 years, client certificates are only valid for one year and this isn't practical for some clien...

d-g-c by Level 1
  • 457 Views
  • 2 replies
  • 0 Helpful votes

we have cisco 1841Hsec installed in our main office & 2 ipsec site 2 site configured to branch offices, & they are working ok, but i discovered that from main 2 branch its working fine both ways but from branch 2 branch there is no traffic & when the...

mwwg by Level 1
  • 1268 Views
  • 8 replies
  • 0 Helpful votes

We have cisco 1841, i was able to establish 2 IPsec tunnels to 2 branch office, its working fine, both connecto main office OK, but can't connect to each other.also i would like help to add pptp or L2TP for remote usersattahed is show runthanks

mwwg by Level 1
  • 566 Views
  • 2 replies
  • 0 Helpful votes

Hi,I have a PIX506e with IOS 6.3, trying to create a VPN tunnel with Netscreen204 firewall. At netscreen side, they have chosen pre-g2-3des-md5 --as phase 1 proposal & nopfs-esp-3des-md5--as phase 2 proposal . VPN tunnel is not getting established wi...

raju by Level 1
  • 1387 Views
  • 3 replies
  • 0 Helpful votes

Senerio:We have on site contractors that are trying to use a VPN to establish a connection to their HQ through our guest network. The contractors on our site are at site B and our internet router is at site A?the two site Guest Network is connected ...

Hi, Ive setup my ASA with Nat to the external world. All services including SMTP and Web work just fine. I just have a problem with CISCO VPN clients connecting from my network. Internet services are provided by an ISA server which is inside the ASA....

Top Solution Authors