VPN

Hi , this is probably a dumb question but...Assuming an IPSEC tunnel is in place and working. The crypto access-list on PIX1allows 1 host access to a large network access-list crypto permit ip host 10.10.10.1 10.11.0.0 255.255.0.0 and PIX2 has the c...

I am in the process of getting things together to cut CDs for my remote users to upgrade their clients. I have a mix of NT and XP platforms and has been several years since a consistent across the board version was deployed. Last I read / researched ...

Hi!I'm having trouble deploying a LAN-to-LAN VPN/IPSec tunnel between a VPN3005 (v4.7) and a CS1721 IOS router (v 12.3.7). I believe it is a design thing. Both VPN3005 and the CS1721 have several LANs on their local network. What i want to do is for ...

Hi All,I have a request from a customer asking me to enable IPSec over TCP on port 443 to connect to the VPN concentrator using Cisco VPN client. The default port used is port 10000 for IPSec over TCP. Will there be any implications on using standard...

Hi.I have a Pix 501 that establish a tunnel with a VPN 3000 Concentrator. I need that people who works in the network of Pix can access to Corporate applications through the tunnel, but also they need navigate through an external firewall, and not us...

I have been assigned the task of setting up a VPN between my company and a company that we are doing business with. We have a Cisco PIX515E, and they have some type of PIX as well. I don't know what model, but it is a PIX. The other company would lik...

Hi!I wonder if I can use the Pix501 as an VPN-server? I want to connect to my local Lan from Internet without using any RAS-servers on the inside. Is this possible?PIX Version 6.3(1)interface ethernet0 autointerface ethernet1 100fullnameif ethernet0 ...

Quick question. I am configuring VPN clients on an ASA box and for the vpn pool I would like to know does the ASA box use its own address on behalf of the clients for communication with internal networks or do I need to add a route to the vpn pool on...

I have a 515 at my main site and a 501 at a remote site. I cannot connect to main site using MS VPN (PPTP)from remote. Can someone give me some guidane in changing the 501 config. Otherare able to connect remotely to the 515 using same client and ...

i am having trouble trying to request certificates on a pix 515 (Cisco PIX Firewall Version 6.3(3))The VPN and certificate side was working before but started getting problems due to the certificate becoming invalid.To cut the long story short we had...

If there are firewalls between the user with a Cisco VPN Client and a the central site with a VPN 3000 Concentrator, could some setting the firewall prevent the user from maintaning a session over a long period of time. Is there some mechanism in the...

Hello,We want to migrate 30 computers with modems in it. Currently they dial into a NT server but we want to migrate them to a Cisco 1800. I have experience with ISDN router-router connections, but not with computer async-router connections. Do I nee...

Hi All, I am facing a problem while trying to put VLANs traffic over Dynamic IPSec VPN.VLANs traffic is at remote site and vlans user want to connect their corporate LAN over Dynamic IPsec VPN.Both end have Cisco PIX FW and remote site have L3 Switc...

I currently have a PIX515E/R and I have a DMZ card that I am about to install. What I would like to do is allow some users to VPN in via the Cisco client to the DMZ and other users to VPN into the DMZ segment using the Cisco Client as well.It’s ok i...

We have two PIX firewalls on different ISP. One has got VPN Ipsec configured connecting to 7 remote 837 routers. We want to connect these remote routers to the other firewall. Is this just simply add another isakmp key on the remote routers?