VPN

Try to config the Pix (50x) firewall for supporting the VPN. The problem is the inside (of the firewall)web serve's IP address is NOT static but dynamically assigned by the ISP provider. In this case how can I configure the Pix (50x) firewall? Thanks...

Hi Everyone,Need help on how to configure vpn tunnel using pix515e and checkpoint. I'm using DES MD5 and having problem establishing even phase 1, SA lifetime are the same.Help would be greatly appreciatedthanks

To configure the PIX 50x firewall for supporting the VPN, I have two questions: 1)Is the configuration web-based? i.e., I only need a PC connect to the firewall equipment, then start the configuration via my PC's web browser (using wizards)? 2.Do I n...

Try to config the Pix (50x) firewall for supporting the VPN. The problem is the inside (of the firewall)web serve's IP address is NOT static but dynamically assigned by the ISP provider. In this case how can I configure the Pix (50x) firewall? Thanks...

To configure the PIX 50x firewall for supporting the VPN, I have two questions:1)Is the configuration web-based? i.e., I only need a PC connect to the firewall equipment, then start the configuration via my PC's web browser (using wizards)?2.Do I nee...

I'm looking for a way to determine the VPN client address of a machine (solaris and/or RH linux) from within a C/C++ program similar to gethostbyname()Perhaps there is a client API that I'm not aware of? Thanks for any help or ideas

Using a router (Cisco 2811) with 4 ADSL links connected to the same ISP, is it possible to implement ‘load balancing’ or similar feature ?Thanks in advanceJvaidie

Hi,I'm implementing a solution, where few sites will be dialing and accepting calls. For example, A will dial tp B when their primary is down, but when the B primary is down, it will dial to A, and vice-versa.Trying to make this work using backuo int...

If I am correct I can use the Cisco vpn client to set up channel to work with the Cisco's router and firewall products. Will the Cisco Client VPN work with the third party remote server? such as the HP DL320 which is a server for web cache, and VPN? ...

Hello,I'm triing to configure the ADSL part of a 1801 with PPPoE and it doesn't work.This is the error:*Jul 6 09:47:16.975: Vi2 PPP: Authorization required*Jul 6 09:47:16.975: Vi2 PPP: No remote authentication for call-outand this is the config, wh...

Suppose I have a remote firewall (pix), to which a web and a database servers are connected. Now I want to connect to this firewall via the internet by using the VPN technology. In my office (located remotely) my PC, along 15 other PCs, are connected...

We need to establish Tunnel between ASA 5520 and Sonicwall Firewall. The network is LAN-- ASA-- Core L2--- bGP Router--- ADSL Router --Sonicwall FW -- LANThe tunnel is not getting established. I am attaching the Tech Report, Debug outputs. The presha...

We're upgrading 2500 series routers with 2811's in several remote sites, and we have preferred modem access to be connected to the console port as opposed to AUX, in order to see boot-up and diagnostics we wouldn't otherwise see. Our only issue is t...

using Cisco VPN client to a PIX to access a linux box via telnet. After approx. 3 minutes of inactivity telnet session stops. The vpn tunnel is still intact as I can access other resources. Problem does not occur on local lan or across wan; only acro...